I have tried to download the the open pilot software from the official website but to no avail. Due to that I'm unable to configure my fcb.  So can anyone please help me?

you will need a lower version of the FC, try again and it should tell you what version u should use... i am currently running 15.02.02

The problem is I can't even access the website.  I have tried it over and over again but so far nil.

Which is your controller ? CC3D or revo ?.
For CC3D you have to use 15.02 gcs , just Google openpilot gcs , and follow first link to download , and  read description for each version , you have to download 15.02.something (this is the latest gcs with support for f3 boards like CC3D.

Sent from my Micromax AQ4501 using Tapatalk

@sooraj, i too am not able to access their website... the other issue here is that the website isn't opening and the error message says it cannot be reached! you can use another alternative which is libre pilot

I believe there was some internal conflict amongst the OPenpilot team and it has been split into two projects - OPNG and Librepilot. All the original Openpilot resources, such as the forum and wiki have been taken down.

AlienX i sold my CC3d and was facing the same problem as was supposed to show the user that i works fine. I went to http://www.librepilot.org/ which has the software available.

Libre pilot is very similar to openpilot! libre pilot is the way to go if u have a CC3D, is CC3D an F1 or an F3 flight controller?

Hi, you can even try dronin

Quote from: Rathi on April 20, 2016, 01:53:22 PM
Libre pilot is very similar to openpilot! libre pilot is the way to go if u have a CC3D, is CC3D an F1 or an F3 flight controller?

The CC3D is an F1. You can always swap in an F3 if you have the soldering skills (as they are pin-compatible). You will then be able to run up to 8kHz on the custom CC3DF3 target for Betaflight.

I currently own a tarot cc3d. I appreciate your help @rathi @sooraj @fxshoppe and @sk1701. Is it okay If I download the software from Libre? .

Yes please, i have tested it so please go ahead and do it

Thanks @fxshoppe. 

Mine is 64bit processor, only 32 is available.  I'm in a fix!! Should I proceed

Ummm....... one more thing..... The new version shown here is 15.09.  Is it good to proceed?

hahaha XD u can even put 8bit processor apps to a 64 its compatible and yeh go ahead and download that one!