Hy guys, can any one tell me how to use a fly sky ct6 b tx with a good simulator like pheonix or any other
i have installed the drivers of tx but still when i open sim my computer do not recognize my tx

Which's your simulator ?

I think the drivers you mentioned above was intended for programing the tx via ( T6 config ) . Does your T6 config dectect your TX !

Yes those drivers were of t6 config and it detected that but whenever i open the sim the red light od usb cable stops glowing ,i tried on absolute rc sim and pheonix

Bump

Does your simulator come with some dongle or are you using smartpropoplus via sound card ?

I just used the demo version of absolute rc sim downloaded from there website and pheonix downloaded from a torrent link
so i dont have any of those sim dongle. I used the cable wgich was supplied with tx to program it with computer

use T6sim

Installing this t6 sim and running simulator will solve my problem??

I am using CT6B with simulators . Initial steps for getting the TX ready was hard for me ! not now i just plug in my TX and Run T6sim  !

Ok let me check