I am a beginner and have 4 x simonk 30a and 4 xA2212 1000kv motor
total amps = 30a X 4= 120amps
Is "Turnigy Heavy Duty 3300mAh 3S 60C Lipo Pack" can pull that motor?
I need more flight time.
Suggest me some good lipo with configuration and flight time..
Also comment link so i can buy... many website cannot ship to India() so i said this.
Thanks..

As per my experience and research, the a2212 1000kv or any 2212 around 1000kv motor pulls 15-16a maximum at full throttle. So the battery should be capable to supply 15*4=60A or take it 70A or 80A as we should not overload the battery. The battery you just said is perfectly Fine for the project and also, I dont know any cheap sites in India that supply lipo batteries.

Can you tell me which lipo you are using.....

Quote from: taksh on November 19, 2017, 09:55:00 PM
Can you tell me which lipo you are using.....

Currently I am using DJI 2212 920kv motors spinning 1045 propellers with 30a SimonK ESC with 11.1v 5200mah 30c and 11.1v 4200mah 30c. Both batteries work awesome. The quadcopter has a weight of 1.4kg and lifts at half throttle. The 5200mah gives a flight time of about 18-22 min and the 4200mah gives 15-18 mins which is good enough.

check this

http://hobbyxyz.com/index.php?route=product/category&path=18_140

Quote from: taksh on November 19, 2017, 06:50:43 PM
I am a beginner and have 4 x simonk 30a and 4 xA2212 1000kv motor
total amps = 30a X 4= 120amps
Is "Turnigy Heavy Duty 3300mAh 3S 60C Lipo Pack" can pull that motor?
I need more flight time.
Suggest me some good lipo with configuration and flight time..
Also comment link so i can buy... many website cannot ship to India() so i said this.
Thanks..

For more flight time, try to reduce the weight as much as possible.  Those SimonK ESC's weight a lot.  Try using OPTO ESC's available on banggood.  e.g. Racestar 20A.  Each ESC weighs about 10g.

I just built my first quad.  Its smaller in size though, 330 Size, total weight alogwith 2200mAh battery is 620 grams.  Gives me flight time (hover actually) of about 14min.