RC India

General Topics => Beginners Zone => Topic started by: radiocraft on October 04, 2014, 10:13:04 PM

Title: Trainer RC plane build Help.
Post by: radiocraft on October 04, 2014, 10:13:04 PM
I want to build a complete RC trainer plane, with landing gears having maximum wingspan of say 1300mm.
Any1 has plan for same or can any1 help me with calculations involved in constructions.?
Any sites for plans and construction details with proper explanation.
Title: Re: Trainer RC plane build Help.
Post by: satz flying on October 04, 2014, 10:35:31 PM
Check out the links
http://www.spadtothebone.net/freeplans.htm (http://www.spadtothebone.net/freeplans.htm)
http://www.instructables.com/id/Complete-Guide-to-Building-Your-First-DIY-RC-Foamb/ (http://www.instructables.com/id/Complete-Guide-to-Building-Your-First-DIY-RC-Foamb/)
http://www.rcgroups.com/forums/showthread.php?t=1174874 (http://www.rcgroups.com/forums/showthread.php?t=1174874)
Title: Re: Trainer RC plane build Help.
Post by: utkarshg13 on October 04, 2014, 11:15:41 PM
Please visit www.vortex-RC.com (//http://)
Title: Re: Trainer RC plane build Help.
Post by: rcrcnitesh on October 05, 2014, 08:15:53 AM
Do you have the elecs or you should buy them.
Title: Re: Trainer RC plane build Help.
Post by: romanxdsouza on October 05, 2014, 10:49:19 AM
50inches
Title: Re: Trainer RC plane build Help.
Post by: radiocraft on October 05, 2014, 02:38:13 PM
I have electronics!
Title: Re: Trainer RC plane build Help.
Post by: rcrcnitesh on October 05, 2014, 02:44:20 PM
what electronics.
Title: Re: Trainer RC plane build Help.
Post by: radiocraft on October 05, 2014, 07:53:31 PM
Brushless motor, 2 and 3 cell lips, servos esc and tx rx set
Title: Re: Trainer RC plane build Help.
Post by: radiocraft on October 05, 2014, 07:58:30 PM
Quote from: utkarshg13 on October 04, 2014, 11:15:41 PM
Please visit www.vortex-RC.com (//http://)
Had look on this site and now thinking to buy instead of making it, but how is the quality and performance of the plane .????
Title: Re: Trainer RC plane build Help.
Post by: rcrcnitesh on October 05, 2014, 08:17:34 PM
What motor, esc, battery, servo etc. ?

That plane is of very good quality and very good reviews (came upon only one thread though).
Title: Re: Trainer RC plane build Help.
Post by: radiocraft on October 19, 2014, 08:59:48 PM
Need landing gear construction help for plane brought from vortex-rc.
I have 2 foam wheels of 20mm. How to proceed with landing gear and what position it should be placed .?
Title: Re: Trainer RC plane build Help.
Post by: kplkum on October 19, 2014, 09:34:35 PM
Take by cycle wheel rods and bend them as u like. .watch my home made plane landing gear are made of that rods.
Title: Re: Trainer RC plane build Help.
Post by: K K Iyer on October 19, 2014, 10:06:22 PM
@radiocraft
Why did Vortex make it without wheels?
For a good reason.
Ask them.

Title: Re: Trainer RC plane build Help.
Post by: utkarshg13 on October 20, 2014, 12:58:01 AM
@radiocraft
I hope your kit must have reached you. If not, it will reach in a day or two.
In my opinion if you are a beginner then drop out the plan of adding landing gears to your VT-Allrounder. Because adding gears will add to more complexity and moreover landings would be tough if you're new to flying. Landing itself is always a challenging task. The skids provided in the kit reduce crashes and damage during landing. Believe me, you'll love to land it on skids. It comes to stop within 2m ofcourse if landed properly.

:hatsoff:
Title: Re: Trainer RC plane build Help.
Post by: utkarshg13 on October 20, 2014, 12:58:53 AM
When you master it then surely you can go for gears :thumbsup: :thumbsup:
Title: Re: Trainer RC plane build Help.
Post by: gaurang.1972 on October 20, 2014, 02:10:42 AM
I think without undercarage you should learn proper hand launch i think tricycle landing gear is ok for trainer you should fix nose gear for your convinence
Title: Re: Trainer RC plane build Help.
Post by: gaurang.1972 on October 20, 2014, 02:26:25 AM
my trainer has tricycle undercarriage see picture bellow