site is not fake but it is a pirated copy of software

what is the best way to get in to rc,, fling the electric planes , i didnt find anhy thrill in it no sound and you wont get the feeling of flying, so cheapest way to start is, get a model from mr. Irshad ahamed calcutta ,its only 1800 rs , 4 servos 2000 futaba 4 channel radio , about 4000 rs a pump 500 rs, and 4 pen torch batteries. an os engine 40 size another 4500 rs. so all together 13000 rs, and the models from irshad ahamed is reaklly very strong durable models, its like calmato,painted and very steady high wing trainer.in banglore   Mr.easser is making a trainer but its not cute to see , its like a bick box fling with wings but models are very steady  and this both planes are very strong and small small crashes wont reflect in it. the imported chiness stuf ,balsa one crash finishes everything, and its soo difficult to repair. prakkat, and ershad and easser selling all props , spinners ,hyorns and all which is indian made ,its very cheap when compaired to imported stuffs, prakkat

will be great if u can post contact details/website of Mr. ershad and Mr. easser pl..

Will the kolkatta person ship his plane? Its nice to know tat we can get a plane for nearly 2k..

Hi there, I have not heard of Irshad Ahamed in Kolkata. However, if you provide the contact number of Irshad Ahamed, then I too would like to see what he is offering for Rs.1800 and provide feedback to others on the forum.

Secondly, Prakkat can you please confirm if you meant Irshad Anwar of Park Street Kolkata?... Cause I would like to to warn you that his prices differ with every phone call... (just my opinion and not bad-mouthing a fellow seller)... We have had bad experience with this person (does not have a shop)... The prices quoted were higher when my friend spoke to him in English and asked for recommendations on which RC products  to buy. Whereas, when we called and spoke in Hindi and informed exactly what we wanted the prices were lower (about 20-25%).

hey guys i want to buy a new rc helicopter at affordable price( not more than 2000). Plz send me the exact address of chennai rc stores.

Quote from: sayeed on July 30, 2010, 08:47:35 PM
hey guys i want to buy a new rc helicopter at affordable price( not more than 2000). Plz send me the exact address of chennai rc stores.

Welcome to rcindia Sayeed
check here
http://www.rcindia.org/rc-outlets-and-resellers/mega-list-of-all-rc-outlets-in-india/

You want to spend Rs.2000 n a Helicopter that will fly inside your drawing room or do you want to fly it outside? if it is the latter, forget about it. What you will get for Rs.2000 will be a waste of money.

However, for that price you will get a decent Indoor Micro heli (6 inch length approx) which will be operated through infra red 3 Ch RC. Check ebay, you will know what I mean.

Or else, hike up your budget to around 3.5 K and you will get a range of 3Ch Co Ax Helis (24 inch length approx) which can fly outdoors in still weather.

Regards,

VC

VC is right. You can check my post for this
http://www.rcindia.org/helis/and-another-heli-beginner/

thanks to Rajath and VC.

this all is ok but the post was about cheap starters and all are talking about RS 20-25000/-
Is this correct? plz help beginners to make a rc vehicle at their home or just 50% of it so they can even save more money for their next model and improve fast,they would know everything about their ride so they can controll it more preciesly than any one on planet...

Quote from: xxkrishxx on July 06, 2010, 07:31:10 PM
Will the kolkatta person ship his plane? Its nice to know tat we can get a plane for nearly 2k..

can u send me one ill give you the address and when i recieve it will pay you. thank you plz reply.rs 2000/- is a good price!

Quote from: alankar on November 30, 2010, 04:05:41 PM
this all is ok but the post was about cheap starters and all are talking about RS 20-25000/-
Is this correct?

Apparently you have not searched enough, even though you posted on on that thread

http://www.rcindia.org/beginners-zone/can-a-plane-be-made-with-the-budget-of-5k/msg13472/#msg13472

It is all about what kind of beginner setup you want.  A long term one (especially when it comes to radios), or something quick and dirty to get started.

Welcome to RC India

hi friends..
myself tejas,
I want all the accesories required to make RC Plane.
please can any one help me out for choosing the best  and cheapest materi.(rc combo's,servos,lipos,TX,RX,other)
please state the individual prices of the accessories,
weight of plane (200-250)gms,
             hoping for quick n best replies....                   
                                                                                                  regrds

   
   Rao,
        I am a beginer in R/c Planes and wish to start the game with the chinees toy
        mentioned in your post,If there is any such shope in Delhi,Bangalore or Chennai
        Pls let me know their address



      ThankYou.

In chennai u can buy @ Rotor Sport & Hobby (Reasonable price)
http://rotor.co.in/

Try the shops in Barma Bazar, and Emerald Hobby Center On Mount Road.Chennai.

   Hai All
          I am a beginner in rc planes .Can I buy a new/ used electric combo   glider/high
  -winged airplane for Rs 2500 to 3500

   Thank you
   ku1415

praveen PVN2000
www.flyingrc.co.cc
this offer is good
http://www.rcindia.org/deals-and-special-offers/special-promotional-offer-on-pilatus-piper-j3-flyrc/msg42691/#msg42691
esc lipo servos from vk and hk txrx from praveen and you are good to go, of on a decent start.
Explore RCforall as well for esc lipo servo deal.

i want to know how 2 make biggners rc plane & heli & what is estimated budget to make them

Welcome to RC India

I moved your post to a thread that already discusses the question you raised.  Apparently you did not take time to read the recommended beginner threads.  Please read them, and then ask any specific questions you may have.

hi guys
im totaly new to rc flying though i am a bit ok with rc cars
thought there was no use make a new topic for my worries
so to start with rc flying as far as i have understood reading the forum this is what u need:
1) esc
2)lipo
3)motor
4) 4 or 6 channel radio
5)glider or plane model..

anything im missing on??
totally noob in this area
i was thinking of ordering these gliders
http://www.rcindia.org/for-sale/3-balsa-wood-gliders-all-accessories-in-box/msg45178/#new

also i was thinking of buying this radio as it falls perfectly under the tight budget
http://flying--rc.blogspot.com/search/label/Radios%20/%20Receivers
can it be used for a simulator too?

Hey dodo you need smaller things as well -
-->Lipo charger
-->Proprer connectors and shrink tube - depends on where you are buying from (some come with the connectors in place)
-->8 AA batteries for transmitter
-->Your plane will go no where witout a PROP
-->since you are a beginner you will need a prop saver and a few band's

Yes it can be used with a sim. I have the 4ch version of this. I prefer the 4ch as it comes with manual servo reverse whilt the 6ch comes without it - you need a laptop to chang servo direction. Servo reverse is essential so go for a radio with manual servo reverse.

thanks a lot cleared a lot of things in my mind
also can i use those gliders i mentioned??
or shall i go for some different ones