hello every one

currently i am working on simulator cable i have made it too with aux cable and some jumper wires . even i double checked connections but it is correct .
with smartpropoplus software in my laptop(win 10) it is not showing any ppm output. and in my pc (win 7) its showing ppm output but showing vjoy device missing .

what should i do or do i need dongle adaptor

or if any one selling used simulator

need help .

whatsapp ; 9033722997

Do you have vjoy installed?
Is it giving any readings?
If you manage to find realflight G4.5 somewhere, I can email you the dongle emulator software.

 thanks Prabal sir for the reply

as in my laptop having only single aux jack of headphone no one for mic. Thus it was having no ppm input.

And as my pc runs on win 7 it was unable to fullfill the requirements of vjoy thus it didn't installed properly. ( I didn't recognise that earlier).

But I checked this on my friend pc after some efforts it worked but only the problem is the rudder stick is not calibrated.

Sir do you or anyone knows how to make laptop single headphone jack works as a mic jack to receive input.

Regards
Priyanshu

I'm not a "sir"!
There are some adapters that are available commonly.
They plug into the single 3.5mm audio jack. They have both line in and line out.
Get one of them.
Vjoy is perfectly compatible with Windows 7. I run it on my Win 7.
Regards

You need something similar:
https://m.ebay.com.au/itm/371870570556?_mwBanner=1

Okk thanks .

I will try to get the splitter cable and than try

Ok thanks

It works on my pc I upgraded the win to win8 and it works
I am having multiflight simulator but don't know how to calibrate the sticks only rudder stick is uncalibrated.

Any suggestions for a downloadable good simulator
Thanks and regards
Priyanshu

Better get the all in one sim from bangoood.
Regards

Just give me a working simulator software link, then I think, I can help   

Hi friends i have FMS sim cable is there any software that it will work with pheonixrc simulator...

@Makerhand

As my simulator cable is diy and without any dongle so I am using vjoy with smartproplus software available for free.

And I am having multiflight simulator

Need help with calibration of rudder stick


Thanks and regards
Priyanshu

Priyanshu, aren't you having a 3.5mm jack on your transmitter?

On transmitter I am having svideo port .
I am having flysky FS i6x tx


It don't have 3.5 mm jack on it

I connected ppm output to signal of aux cable and base to base. Of svideo cable to aux  cable

@Priyanshu
I hope this video will help you...