Plastic speed boat that does flips and rolls

Started by laserdesignman, June 16, 2013, 01:10:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

laserdesignman

This is my new kit available from http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=121127043605&ssPageName=STRK:MESE:IT
Here is a video on youtube http://www.youtube.com/watch?v=FU2-jtKI6fs&feature=youtu.be this is a fun boat to drive
I have set it up to bounce like it does but adjusting the stringer to put the nose up if you want this boat to be just fast and steady trim down and add trim tabs to trim down more
I am running a 36/74 triple SSS motor way over kill for the size of the boat but it was all i had spare in the garage at the time of setting this boat up
I will be bringing out a water jet version of this hull latter in the week with a flat section to put the water jet drive
With a water jet drive you can do a cheap version your self with a NQD jet boat water pump for about $25 AU or even cheaper they can be set up with brushless motor for some real speed

VC

Outrageously funny and a whole lot of fun to race! Poor dog, he so desperately wants to have a go at it!!!
Growing old is mandatory, growing up is optional!

laserdesignman

I think I have found a new favorite boat Si looking forward to putting a jet drive in one should be able to do some good slides