This 165 ft beauty caught my eyes when I first saw it. I am not so good at boat building but I have tried my best.
It's 1/110 scale , 45cm long,7cm wide and the height is 4cm. Still is a work in progress. I have a plan to run it with dual 180motors with 3 blade 26mm propellers. I hope the power will be enough to run it fast :)
What material are you using ?
Some sort of composite board ?
@saikat
It's 2mm pvc foam board actually.
nice work
Thank you but still is a work in progress. Long way to go!
2×180 motors installed . Bought some universal couplers but they proved themselves much more hard working , haha. So I used silicone tubes as couplers.
The esc is quite overpowerd. 320A 🙄. I might change it with 40A esc .
Single servo used to control dual rudder. Works just perfect . ;D
The bottom looks like this. The prop shaft and sleeves are bought from Ali. They are quite cheap, not very good but OK.
The props are cw+ccw 26mm counter rotating props. Awesome cheap props. Not nylon, abs plastic probably. And rudders are handmade from 2mm wood(actually they popsticks) :P
Type 76F dual cannons fitted on the mount. The body is made of lipgel cap, 2mm shaft , pen shaft and whatever I had.
After painting , this is how it looks. Not So bad eh? ;D
I will have to put some rails, and a mast,radar, AA guns, depth charges etc. I will try to put more photos and vedios in near future , insha allah. Hope you enjoyed it .
Suggest me if there's anything more to upgrade , or any ideas, feel free please ! Thanks!
Very nice {:)}
Thank you sure! :salute:
very good build recently very few build logs of boat in this forum {:)} {:)} {:)}
More clear view .
I have some more build photos. But this website needs pictures less than 200kb. I had to work with all pictures. No offence,but it's a bit disappointing though. I wish I could upload the photos directly!
If I have time , I will try to upload all my builds.
Regards .
Done rails and radar mast. Now depth charges and 2×orlikon 20mm with some life rafts.
And yes of course the flag. :)
Beautiful Build... Nice detailing
:salute: Rooster
Thanks buddy. I tried. Alhamdulillah it worked out good. Small models are tough to construct when biggers are easier.
It was the 2nd run. Ran well and smooth. Will try to put a link if it's on the YouTube. No other way to share a video so..😥
Awesome!
:salute: Thank you Anand!
https://youtu.be/1Kr7O4a970o YouTube video of MARCH'71
@sakibian,
Lovely.
Especially that V shaped wake!
Yes when it rides the waves,i feel proud of this lady haha. So thin but still so smooth she runs. Thank you guys for the support!