This 165 ft beauty caught my eyes when I first saw it. I am not so good at boat building but I have tried my best.
 It's 1/110 scale , 45cm long,7cm wide and the height is 4cm. Still is a work in progress. I have a plan to run it with dual 180motors with 3 blade 26mm propellers. I hope the power will be enough to run it fast

What material are you using ?
Some sort of composite board ?

@saikat
  It's 2mm pvc foam board actually.

nice work

Thank you but still is a work in progress. Long way to go!

 2×180 motors installed . Bought some universal couplers but they proved themselves much more hard working , haha. So I used silicone tubes as couplers.
The esc is quite overpowerd. 320A 🙄. I might change it with 40A esc .

Single servo used to control dual rudder. Works just perfect .

The bottom looks like this. The prop shaft and sleeves are bought from Ali.  They are quite cheap, not very good but OK.
The props are cw+ccw 26mm counter rotating props. Awesome cheap props. Not nylon, abs plastic probably. And rudders are handmade from 2mm wood(actually they popsticks)

Type 76F dual cannons fitted on the mount. The body is made of lipgel cap, 2mm shaft , pen shaft and whatever I had.

After painting , this is how it looks. Not So bad eh?
I will have to put some rails, and a mast,radar, AA guns, depth charges etc. I will try to put more photos and vedios in near future , insha allah. Hope you enjoyed it .
Suggest me if there's anything more to upgrade , or any ideas, feel free please ! Thanks!

Very nice 

Thank you sure! 

very good build recently very few build logs of boat in this forum 

More clear view .

I have some more build photos. But this website needs pictures less than 200kb. I had to work with all pictures. No offence,but it's a bit disappointing though. I wish I could upload the photos directly!
If I have time , I will try to upload all my builds.
Regards .

Done rails and radar mast. Now depth charges and 2×orlikon 20mm with some life rafts.
And yes of course the flag. 

Beautiful Build... Nice detailing

  Rooster
Thanks buddy. I tried. Alhamdulillah it worked out good. Small models are tough to construct when biggers are easier.

It was the 2nd run. Ran well and smooth. Will try to put a link if it's on the YouTube. No other way to share a video so..😥

Awesome!

  Thank you Anand!

YouTube video of MARCH'71

@sakibian,
Lovely.
Especially that V shaped wake!

Yes when it rides the waves,i feel proud of this lady haha. So thin but still so smooth she runs. Thank you guys for the support!