Maharana, plz send me d plans, as I want to build one

This tugboat is little critical in the sense (1) the deck is not flat, (2) the sidewall curved inward (3)  there is a step cut in the sidewall in between bulkhead 5 & 6.
Plan_1: More suitable for making fiberglass mould where I have eliminated the Keel which is projected at the stern. 
Plan_2: I have just given the line diagram of bulkheads and keel, you have study & compare this one with the original plan before cutting the bulkheads and other parts. 
The length of this boat 3 feet, around 1:25 scale of the original.

thank you very much Sir, for the plans. will be working on it as soon as I get time

HI desachristopher,

This is one awosome boat, could you please share the other details like motor used, controller, etc. This will help other people Since i am new to RC's this will help me to understnd how it has been build on the Electronics front.

Hello Sir,
I have printed the tug boat plans, n gonna start the work, I would be greatful if you share some more pics. of ur same project, for reference,

thanks.

Hi christopher...
You are really a great boat builder...please can you tell how you got those curves on 3mm plywood?.... this is THE material i was looking for...i didnt get foam of fiber glass so i am plannong to build with aluminium or ply( your build gave me the idea)

plywood is good, for this boat I used 3mm ply from local ply shop dat also ordinary one, I did not use any instant glues, but fevicol, which is used for wood, but the thing is it has to keep overnight to dry, for carves  I used to either clamp or nail.

SIr,
we are planning to built a 70cm rc boat with a ic engine..we have the ic engine..
but can u please help me with the radio control, rudder mechanism, drive train..
ur help would we apprecited..