Hi Guys, here is the build log of my new Air boat, the plans I found on some internet stuff, and the material used is depron foam, fevicol, coz I dont have any foam safe glue, other then this.

here is the plan and some pics.

Good Going man keep us updated !!!!!!!

Can't make out doodley-squat from these plans. Can you post larger or a link?

Here is the link from where I got the plan

http://alex-tretter.magix.net/all-albums/!/oa/1851904/

some updates

pics

pics

I was looking for some 3mm plywood, for motor mount and rudder. couldn't find some, as I wanted to finish it today itself, so I decided to stick with foam itself.

any suggestion for the reinforcement of the motor mount, coz it look fragile.

here are some pics

pics

pic

You may want to reinforce the motor mount with some tape. The motor may get hot and cause the glue to come off. Just take off the motor and put some tape around the mount.

I want to paint this, which paint should I use, Please HELP 

use fevicryl, you will get in local stationery store .

some pics

pics

I brought 2 colours of different brand, BLUE from Camel Febrica, which seems to be good, and RED from Pidilite Fevicryl which is not holding the grip to the foam. and comes out easily.

Gr8 Colouring skills.. good going .. when is the maiden ...? all the best for that.

@desachristopher  good job  , btw whats the motor u using and whats the battery u intend to power it up with , looking at the model i would suggest it to be placed at the front of the boat to counter the front lift due to pusher thrust , and also would certainly suggest a reinforce for the motor mount and its vertical supports, cause ones in water the stress will grow on them

motor is 28 size outrunner KV2200 and i have a 3s 1500mah lipo

nice , i would definitely suggest an reinforcement try using epoxy and make a layer on the vertical support holding the motor mount to your boat ,use some ice cream sticks too for the reinforce

Well done looks great being made from foam it should rocket along 

This is my air boat I built a while ago it is 1200mm long 500mm wide and runs a 55/60 750KV brushless motor on 6 cell LIFE battery

I hope yours goes better than mine it's fast but I made a bit of a fatal mistake when I built it I did it with straight sides and they really need to be
angled out because it digs in around corners at high speed and nearly flips one day I will fix it

which epoxy can I use for Foam

@ laserdesignman, your model look awsome, guess its of Balsa, I like the grill and railing you made, highly pro.

Thanks Sir
Still not finished, I am going to change the hull shape a little and see if it helps corner better,
but still lots of grinding to do on the steel cage and rails and still have to make the seat in the middle for the drivers
and then paint it just have to get time

it is made from 3mm plywood and coated with wests system resin

Araldite clear epoxy ,its available locally at hardware shops , u even have a choice of 5minuts fast and regular