I use vaseline

thanx brother got it .

first run

looks good on water; any plan for independent motor control?

I wanted to control motors independently but dont have any idea, how to, I using FS 4ch transmitter, and for throttle I am usingh ch 2 i guess, which is for elevator. if u guys have any ideas then please share

thanks

If you have a plain 4 channel remote, purchase a V Tail mixture separately, connect motors to ch. 1 & 2 through V Tail.
attaching couple of line diagrams with and without V Tail mixture.
Note: while connecting 2 ESCs (disable BEC wire (red one) of any one ESC.

i'LL TRY THE 1ST DIAGRAM

THANKS

There is no much difference between diag. 1 & 2 but diag.2 is easy to operate.

guys, can u help me with the painting, will the oil paint hold on fiberglass, i had already applied a primer coat, n some filler, 

Oil paint  I mean enamel paint. no problem when applied on FG, to make the surface more sticky, sand the surface with 180 or higher emery paper with water.

Is it complete?

Not completed busy with some work these days. Last wat I did was a coat of black paint


- now Free

CABIN

stickers or paint for detailing?

was thinking of painting

Nice build

some update

Please post a link to the ESC that you have used and (in case I've missed it) what is your motor + prop combo?

where is everybody in Boat section... anyways I need a help. I have brass rod for railing , but could'nt glue, can u gys help me with this

Better than Vaseline, I think clear silicone grease should work better at water proofing..
It's more viscous though, so a little more resistance expected

Rest u can try n see how well it performs

Anyway good innovative DIY boat mate 👍

Christopher, I soldered mine in the Neptune build. Works good

some updates, m not getting time to complete this, its almost done.

I could'nt wait... although its not completed here are some pics..

Nice build.