Main Menu

My Swamp Buggy.

Started by R C, April 25, 2011, 04:34:56 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

R C




Motor  : TowerPro 2408-21T.
Prop    : 7x4
Battery: 2200mah, 3 cell.
ESC     : 30Amp
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

sandeepm

Nice..is it possible to run your buggy in a striaght line as possible...?
Fly high if you have good set of batteries.....!

R C

Yes Sandeep, it can run in a straight line. Little difficult to control it on land..  :giggle:

This weekend i will test it & post the video.

Thanks
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

R C

Few pics.

--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

R C

More pics
:)
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

R C

Cage for the prop.
Made of wooden embroidery frame which is easily available in market, not complete yet. I have to cover the side of the cage with wire mesh.
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

R C

Rudder.

Sorry for the poor video, recorded it from my mobile phone.





--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

ujjwaana

Masta build ahe  Sarad bhauu!!
Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

Akshayb

Inspirational Build, very impressive. {:)}

Paint Job is icing on the cake.

R C

Thanks Ujjwal & Akshay,

The model is not painted, i have done stickering job on it.
I had some vinyl sticker left with me, so decided to cut those stickers for this model.



--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

rajathv8

The stickering job is superb. For a sec i tot it was balsa with monokote :D where do you plan to test this ? :)

R C

Thanks Rajath,

Planning to test it in the lake near to Hoskote this weekend.
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

R C

FINALLY IN WATER.

Couldn't push the throttle more then 60% as the model was bouncing on the water & i had not sealed it properly.






:)
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

VC

Hey RC! That is a BEAUTIFUL build! I really like this one. :thumbsup:

Please share a few details about the building materials used. Is it balsa?
Growing old is mandatory, growing up is optional!

R C

Thanks VC.

I have used sunboard for this model.

Hull: 22 inch length, 10 inch width & 3 inch height.
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

rajathv8

Awesome RC :) Where is this place ?

foamybuilder

Super RC. Where is this place?

sunk?

hi R C
the 'swamp buggy' goes really well, and looks very good............ ...good job there.
perhaps it could do with a little weight midships to help with the 'bouncing' at higher speed?
these do tend to be 'top heavy' with the motor on a pillar......perhaps put the motor down on the hull and 'belt or gear' drive to prop.
[a gear on the motor and the 'same size' gear for the prop would give the same out put as now]
regards
don
regards
don
UK

R C

Thanks all,

This place is just 2kms away from my house.

Thanks Don for the inputs, yes it was a  little weight midships, i will try to rectify it.

Thanks

:)
--o-o-Ộ-o-o--   --o-o-Ộ-o-o--   --o-o-Ộ-o-o--

anwar

Not sure if your buggy looks better, or the location you are testing it !

:goodjob:
Hangar : Please see my introduction.
RC India forum and me : About this forum.

SunLikeStar

All most missed this, very nice build. Love the video's  {:)} want to see it go faster :thumbsup:

dhaya6666

9842536330