Hey friends i am planning to built a new Catamaran hull boat with max power Brushless motor and Esc as here
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11240
can any one help me out with plans, electronics and which material should i use, as in my first deep vee hull boat i used balsa.
Want to make it wild and damn Fast (:|~ :o ............
hey guys pl help me out.......
No one interested :headscratch: ......
Hey guys i got the plan....
pl :help: me out with the electronics.........
hey Ghanshyam!!!!
Rooster has built Atlas Van, here is the link.
http://www.rcindia.org/boats-kites-trains-and-all-others/scratch-build-atlas-van-lines-boat/
he has given very much details and the material used. Material is SunPack is generally used as advertising board for printing
if u want to make same boat as hobbyking, with same length then go for same setup used.
i think u can use
motor: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8593
ESC: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10627
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8946
moreover u can get in touch with Rooster, there is one more guy Maharana, u can find this guy on the same thread contact him, he can assist u on this as well
wish u all the best!!!
Thanks a lot sir,
Ya i am in touch with shreekant sir (Rooster).....
I also thought to use
ESC: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8946 X 2
MOTOR: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8594 X 2
BATTERY: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7295 X 2
And planning to built from balsa..
I also had an idea of using fiber glass by using a mold.....But will cost a lot.....
I REALLY wouldn't like to address Mr. Satyabrata Maharana as just "one more guy Maharana" He is, after all, in a league all by himself.
Before you jump to any conclusions, I am sure there was no disrespect intended, but such casual language and references can be a put off. Sorry if I sound a little old fashioned here.
Admin, could we have a little bit more courtesy and decorum enforced on this forum? Please?
VC bhai - I cannot (or more accurately, I should not) hold people responsible... people who have not met Mr Maharana in person to revere him at the same level as someone who has. I am sure being in his company would change the perspectives of most people here, and that would be reflected in how he is addressed. But in this virtual only world, it is unfair to expect and ask for anything more than basic courtesy/dignity (which sort of directly means no name calling, no cussing etc).
I hope you understand my dilemma here.
Hi VC,
i really didn't mean to disrespect him. Though i didnt personally meet him, i have seen his work on this forum, it is extraordinary and only because of this i have suggested his name otherwise i wouldnt hav, though my language was causal!!!!
i do understand ur respect for him!!!!!
VC sir and ashJR7202 sir,
I respect u all..... :bow:
Can any one help if i use
ESC: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8946 X 2
MOTOR: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8594 X 2
BATTERY: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7295 X 2
Can make a fast and powerful BOAT.
And will contact or PM Mr. Satyabrata Maharana sir for further help.
r u planing to use 2 motors, then i think Motor is fine, but do u really think u need 120A ESC in this case!!!! but will help u for ur future builds!!!
i think original one have only 1 motor!!!
You can find many boat such as one in this thread
http://www.rcindia.org/boats-kites-trains-and-all-others/how-to-drive-a-boat-when-the-lake-is-frozen/msg41784/#msg41784
Want to make such fast one,
Have a look at some of the boats.....
Started with plan and sample of building material,
PLAN
Hey dude, we'll meet up this weekend. I am sorry I was not able to meet you last weekend as I am recovering from injuries from car accident, I was busy getting some medical treatments....I'll visit your place.
Some more pics.
Still the outer covering is left out.
Planing to use same material of 1mm and after that will apply carbon fiber cloth on it to make it strong.
Still have to fiber glass the boat to make it real strong..
Some picks,
:)
{:)}
looks great!!!!
After paint job...
:)
Have you glassed it already? if yes, which epoxy did you use?
I am planning to make a fiber glass fuselage for this plane i am building, but I am not sure which epoxy to use.
Sir,
I applied fiber cloth on the bottom part, I used Araldite as epoxy...
But i din got a satisfactory result, The best way is to go to auto shop who modify bikes or make Bath tub...
I am going to visit a factory who produce bath tub using fiber cloth, I am also planing to make a boat from fiber glass.....If you get some information regarding the making and the epoxy do PM me.....
sure!
I had good result with Araldite but its is pretty expensive and difficult to sand.
And please don't call me sir, call me SunLikeStar or Amit if you like :)
Good Boat man................
Eagerly waiting for my electronics from Hobbyking 8-)
Mean while got some graphics done on my boat......
:)
great job on th boat Ghanshyam!!
BTW after talking to a few experienced guys I've ordered this epoxy (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=8461) and this glass (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=10903), thought i'd let you know.
Thanks a lot Amit sir... :)
You have a PM!!!!
Nice job Ghanshyam.
{:)} {:)} {:)}
this bright red colour, reminds me of roopesh and his gorgeous boats, i wonder where would he be now ? :headscratch:
Thanks a lot Maharana sir :bow: ..... but still a lot to do, Have given rudder in aluminium casting...Hope i get good result from it.....
@augustinev: Sorry i don't have any idea about whom you are talking?
Read this
http://www.rcindia.org/boats-kites-trains-and-all-others/co-axial-contra-rotating-destroyer/
and of course
http://www.rcindia.org/rc-people/introducing/
At last got my Electronics from HK..... :) :) :) :) :) :) :) :)
Thanks to Arpit 'traxxrc1' for helping me out!!!!! :salute:
Enjoy bro, and really sorry for delay.
Courier was slow, but you still got it quite early.
Congrats, and do post up some vids.
Hey bro, so when are you putting in the electronics ??
Let me know if you need my help, I'll come-by next weekend too and if you are already done by then, let me know, we'll go to Mahi River in my car for a test run.
Guys - I saw this boat at Ghanshyam's place day before yesterday, its too awesome and real big....!!
What augustinev sir is referring to is that same girl-turned-out-guy drama, rathi krishna - Roopesh...
I am blown away Ghanshyam. What a boat! (:|~
In case I missed it, what are the dimensions of this baby? You've got some pretty impressive hardware and if you are not careful, she will rip the hell out of the water.
You've taken a lot of effort and it shows. All the very best. :thumbsup:
Superb......... {:)}
Thanks for the plan Ghanshyam,
I am also planning to do the same boat but a small one.(may be 20 inch) which will run on brushed motor.
Great job....... {:)}
@ VC sir: Thanks a lot, My boat is 45" length & 12" beam.
Ya i bought that electronics to run it Zip Zap Zoom ;)
@ Sharad sir 'RC': Thanks and Good luck for your new boat built,
Make your Boat to FLY!!!! :thumbsup:
@ Dhruv chokxxi: Ya i am planning to fix the electronics, Will call you up if i need some help,
and will make my Stallion ready as soon as i can, i got my High torque servo also 2day.
Thanks to visit my place & your compliments.
@ Arpit ' traxxrc1': Will soon post a video. Thanks for your effort....Thanks a lot!!! :salute:
Wiring system for boat electronics having ESC's without BEC 'Battery eliminator circuit'.
Big welcome bro...
BTW whats are the dimensions of your boat, and ya , color is really decent, i dont thnk it looks anyway different from the factory made boats ;D
Arpit i have already specified the dimensions in above post.....It is of 45" length & 12" beam.
But still i din't got satisfactory finishing!!!!
At 45", she will be a beast! All the best for your maiden. Drive slow, fly low..............
Done with all the fabrication part and ready to install... Want to see it running 'sOOn' !
Photos of custom made Strut shaft from Stainless steel to drive the boat using Flexibal shaft of 4mm.
Thanks a lot Sreekant Sir for your hep.....
Boat rudder which i got made from Aluminium having a Water pickup And Coupler with 4mm id at flexible shaft end and 5mm id at the motor shaft end.....
:)
http://www.youtube.com/watch?v=NMnVnJwj6lQ
Don't limit this racer to swimming pool boundaries,
would love to see it on a bigger surface.
Mahrana Sir,
Just for test run i went to swimming pool. Still i need to lower the struts and have to try out new props...
Will be back with a new video soon!
Guys pl comment on it, how is it? :P
wow!!! its rocking man
amazing!!!! :)
Good work done on the build.
nice clean edges!
how did you make vinyls on boat add its information also :headscratch:
Hello Ghanshyam
Can i get this plan?
thank you
nice one ganshyam,
but 1 thing,, it has lot of drag, its not lifting in front. although it has 2 motors.
Tried moving the battery back (to the stern?)
Hi, Where can I get this plans? Thanks.
So what did you use to build the skeleton of catamaran?
@Lord
I can send you the design! Just send me your email. ☺