Hi friends,
This time I am going to build gas carrier. Dimension is 1100 x 180 mm.
Here are some images of laser cut bulk heads and some images of perfection I got after adopting laser cutter. Will update step by set construction.
Krunal great going! We need to talk. Will it be possible for you to cut some plans for me?
Sure sirji. Can talk by 7 pm today or after any time. Due to Diwali will be busy during the day in office work. So any time after it. Best would be in night. Can connect through skype also.
Excellent work!
Great!!!! That will be awesome built. Did you buy laser cutter? And which material the bulkheads are made up of?
will be following this post. Good luck... :)
Since it will be a static model i have selected MDF 2.7 mm. Model will be covered by balsa only because i give preference to it only. going to update covered images very soon.
Keep watching :hatsoff:
Thanks sanjay ji
Why only static? We could really use a Tanker on the RCI fleet.
VC ji,
This is for some one who want me to build it. He just wants to use it as a show piece.
Friends,
Here are final assembly of bh,have remove almost 50% bh to reduce the weight. I think will cover it by tomorrow.
Nice... any pictures of how it would look after it is completed?
Here is a progress.
And probably it would look like this. Not decided yet with which kind of super structure to move further. May be flat tank, or dom tank.!!!??? ???
Beautiful!
Look at all that balsa..................... (:|~
Yes sirji
I have completed hull construction today. Will give final finishing by weekend. And hope to finish it final by 10th. Now main challenge will start as have selected copper tubes for deck line of gas.
Awesome...
very nice work because u r master
Thanks Gaurangbhai, Come down to home to see it.
Very nice work indeed! You have perfection in your hands!
Thanks Prateek. Do visit again for more detailed work.
Here is little progress.
If you REALLY want to get into a lot of work and detailing, here is a page that you may find interesting/painful. Go for a Dome Tank Superstructure - it adds more character to the model.
http://shippy.hubpages.com/hub/SHIP-EXPLORER
Yes I am also thinking for the same. Have ordered some parts from uk. Waiting it to reach to me. Also adding copper tubes of 2,4 and 6 mm dia. To give it realistic look with white orange and red scheme.
Thanks for the support.
Boss, I urgently need some copper (preferably brass tubes with inner dia of 3mm or so) for prop tubes. Available at your end? Pm me if you can help me. Can we talk now?
I have few. 3.01 dia. How long do you want?
Finally it will go with 4 dome. My work is going to be more challenging? It will require more detailing with prisision. Feeling excited to move further.
Probably it will look like this.
nice looking krunal
shaping up nicely.. Great work. :-)
You can use empty juice cartons for the building ( I don't know exactly what its called).. ( the place where the crew operates from)
You are talking about bridge?
double post.
wow! nice build sir!
Are you planning to add a helo deck? ::)
Sent from a potato using a lamp - now mashed
Friends every thing is ready just waiting for dom which i have gave to make. Did not go to collect it but by sunday entire set up with rough planning will be ready. Water and weather proffing is done. Now will start working on to make gas pipeline and connection.
She is ready for makeover.
But confuse ???
Which color :headscratch:???
Very nice
could you post some close up pics of the sailing ship
model in the background ?
Thanks but It's a non working ship. Static Model.
Looking GR88888!!!!
Quote from: Gajjark on November 18, 2013, 12:12:16 AM
Which color :headscratch:???
Oil Tankers have bright decks for more visibility. White, orange, Green or Red. Check out some images of oil tankers
Thanks Amit. Have decided to go with white,red and black theme.
So deck will be white with White Dom. Which I have prepared.
Here some close up of dom and scratch built anchor winch.
I have received some deck fittings and waiting few more. Expecting to receive it by day or two.
Deck fitting would be more challenging. 8-)
What are the domes made out of?
How do you plan to reshape/modify them? The tops of the domes are not exact replicas when compared with the photos of the Arctic Princess.
It is made out of Fibreglass mate.
And picture which I have posted earlier of arctic princess was just for reference. Ship it will not match exactly to it.
Fixing of Dom and pipeline would be different.
All the best!!!
Thanks.
More progress. It was really difficult to decide about the super sturcture. But at last it is in place with lots of observation and study. Also got deck fittings so now probably it will be finised by these week end.
Here are some pics of it.
Deck Fittings.
That looks amazing. Really admire your attention to detail. Great craftsmanship!
Thanks buzz. Much more to fix on her. But after paint work only. :hatsoff:
Looking good. nice details on the tanks(Wooden railing and the pipes).
:thumbsup: :thumbsup:
nice going brother@Gajjark :)
Thanks amitji and puntyji. Few more fitting will be there on tank like vent and wheel ext.
Hey good job,
From where did you get those railings. I had made one container ship model and making railings was very tough job.
Shantanu
thanks Shantanu,
Bought it from UK. :) 250mm long and 11 mm in height. But they sell it very costly. I think by spending for one you can cover 2-3 model in the same cost. ;)
i think old krunal is back very good job done {:)} {:)} :bow: :bow:
Model is now painted in white red and black scheme.
Here are some images. How is it friends? Any suggestion.
Just one suggestion Sir - complete this beauty ASAP. ;D
No words for this beauty {:)} :thumbsup:
Salute you sir :salute:
One question sir from where are you ordering balsa ???
love the paint job :thumbsup:
Thanks friends. VC ji. I also want to complete it but bit busy in other work. It will be on board by next Saturday surly.
Harsh I order it in bulk from Ecuador directly.
Too good...
I hope this gets completed soon
I dont know if someone observed, you can see the reflection on the boat.
stats that paint job well done. Eagerly waiting.......
Great finish... :thumbsup:
Yes after very long process it will be finished soon. Keep watching for more updates. Today have finished paint job of superstructure.
Hai friends,
After a long business tour I have put my hands hard on model. In last two days this is what I was able to complete. Go through it and enjoy.
:)
Great Job ..... Gajjark
With due apologies Krunal, this beauty needs a better photographer to capture her flawless build and details.
Really Gajjark Sir Salute you the very best one its so good :) :hatsoff: :salute:
Hi,
Here It is.
Thanks frients.