all respected Modelers.. it is hard to walk.. and too hard to walk with holding a craft in hand.. so means not sitting at home.. because RCying is heavenly.. this brings unmatched happiness in our life.. and 100 realism.. so i found an alternate to help me to cover about 700 meters of road, is tarmac, mud and gravel along with sea shore.. while thinking about a craft, i realized that one of my high speed race truck in rest.. so taking a little reworks on its main gear box, and adding a reworked motor it came perfect.. but still working on it as i have to revise it all for even more goodness.. so i started with new cabin works.. all reinforced paper..
and i calling her as CARRY-B.. means one carries the boat.. :)
the cabin is inspired from a MACK truck.. and finished in industrial yellow..
wheels also same..
almost finish..
the trailer is from simple high stiff 5 mm foam board.. nothing used to join it but a simple bolt.. with two spare servo horns..
and mission time..
now she is ok.. and i am working on a new trailer with HD suspensions.. for greater safety and stability.. in all terrains.. and it will be also equipped with a self loader and slipway..
here is the cool action..
http://www.youtube.com/watch?v=BrdV1qEjYEk
This is marvellous Sir.... You have a mini industry out there...!!
any boat lover can try this.. with big dia wheels.. is better..:thumbsup:
yes Adi.. i have a great work shop.. with all possible scrap raw materials.. :giggle: thank you..
Awesome... It is very much clear from your snapshots.... :hatsoff:
Quote from: roopeshkrishna on September 17, 2012, 07:36:36 PM
i have a great work shop.. with all possible scrap raw materials..
Also Your DIY driving shaft thread helped a lot... though still not getting brass pipe... dunno where to find them...
nice.. those tubes can collect from a motor work shop, as they replaces the brake fluid lines from jeeps and heavy vehicles.. these tubes are too stiff than ordinary brass tubes, never rusts, can use as bearing bushes and outer tubes.. can collect for scrap price.. or those brass, copper and various density tubes can collect from brass material dealers.. but they only sell those tubes to a pre cut sizes..
Thankyou Sir...
I am sure it will help...!!
{:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)}
{:)} Awesome!! What next? You own port?
one by one.. ample of ideas.. :salute:
hats off roopesh sir. :bow: :bow: :bow:
i have seen many of ur models but this i just cant say