Hello all, I have connected two n20 motors to a dual brushed esc. Have also connected a transmitter and receiver with a lipo battery. When I switch on the transmitter the left motor spins at max rpm and the right motor stays off until I move the stick to extreme left.
Also there is a loud whining noise when motor spins.
I am a little confused.
Please help
@RCnoobie1
I have no experience with dual Esc, but you can try this:
1. Move the trim to the left
2. Interchange the motor connections
Best of luck
Thanks. Tried multiple motors no luck. It something to do with the mix switch on the esc which allows tank steering with 2 wheels.
@rcnoobie1
Did you try moving the trim to the left?
Doesn't work. There is a yellow wire from the esc that goes into the receiver for mixed mode. Let me try that