No response on throttle signal for Modelart Sandstorm car

Started by aditya28195, January 02, 2016, 05:34:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

aditya28195

Hey guys !!!
I'm facing a problem with my RC, its a modelart sandstorm. The problem which I'm going to discuss has occurred suddenly.
My RC car doesn't respond to the throttle signal, it responds to the steering signal.
What may be the issue any idea ?
Please help. If anybody knows any rc repair shop in Mumbai do let me know. Thanks :)

iamahuman

Are your motor wires connected?

You could try powering the motor separately to rule out a faulty motor.

"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.

rdx

Do check this link below for your queries and discussions. And if there is any issue with the motor then you can install a new motor yourself if you are OK with soldering stuffs. You don't have to visit any rc repair shop.


http://www.rcindia.org/cars/kyosho-axxe-23535/


If you can't find replacement parts contact modelart Mumbai they should be able to help you with the stock parts.
TRAXXAS SUMMIT,
SLASH 4X4,SLASH 2WD,
TRAXXAS SPARTAN,
THUNDER TIGER SLEDGE HAMMER S50,
LOSI DESERT BUGGY XL PROJECT......
HPI SPRINT 2 DRIFT
HPI SUPER 5SC FLUX 1/5 PROJECT...

lijochrn

If its electric powered, swap the steering channel with throttle in receiver and check for working.  In this way you can check both channel of receiver working or not.

If stilll not working check for all motor terminals. Loose soldering may affect.   

Or power motor separately as the other member suggested. Isolate each item and find the cause.
Always Slide iT...