The K3 is the successor of the G3 Sinister Saint
The only aim of this project was to build a really fast trike. So yes, this is my fastest car and after some Google-ing, figured I owned, potentially, the fastest RC trike in the world. It can easily do over a 100kmph on 4S, given, I iron out all existing linkage issues plaguing in the front end and gather some nuts to run it that fast.

Most parts are custom designed and produced. I will be replacing off-the-shelf parts with custom machined/3D printed parts to optimize the design further.

Current setup:
Turnigy XK-3650 3650KV Sensored 540 motor
Turnigy 60A V2 ESC
16g servo
Rhino 3S 2200
Running weight 1-1.2kg

Started this project pretty much a year ago, but effectively, it's a 2 month build really.

Started final assembly on Dec 31

 

 

 

@anjanbabu,
Lot of progress since last year, no?
Perhaps you may remember a suggestion
To paint it British Racing Green...
Best wishes

Awesome build anjan! Can't wait to see ridiculous snapchats of you running it towards  dhruva again xD

Looks good, can we expect monster truck tires on next version  . why not use csk screw on the bottom !

Iyer sir, yes. Very less jugaad this time.
I will be making multiple body shells, BRG will be one.

Aniket, all I need is a crawler to chase Dhruva. 


sahilkit, I'm not into off-road cars so much, I'm gonna try though.
I didn't have CSK screws back then, it's a early assembly picture, now all replaced.

Body looks fab
btw is the 2 wheel side backside and moter in front ?

Tanmay, Thanks! It's a reverse trike, so two wheels front and one on the rear.

Jabardast !!! Built  ( Fantabulous --> Jabardast)

are the gears ( Black) worn out or its meant for friction drive....

rastsaurabh, the gear in the picture is worn out.
I'm not able to find a pinion that meshes well with the spur, so the spur get chewed up pretty quick.