Hi,
I wan't to know that THUNDER TIGER TOMAHAWK BX is a good buy. And should I buy it from rc sky hobby means is rcskyhobby.com is a trusted site.
Or I should think for another BUGGY or WEBSITE (please mention).
Please help.....Thanks in advance :bow:
rcskyhobby.com is a genuine site.
What is your budget? You may explore more options.
My overall budget is Rs.22,000
Hey guys,
tomorrow i'm going to order tomahawk bx from rcskyhobby. I'm very excited. 8-)
all the best.
Make sure you order the starter kit and fuel also.
Also suggest you get 12 AA size rechargeable batteries (800 mAh minimum) also ready (charged) before hand so you do not have to wait when the car comes.
As an alternate, use "Duracell" batteries only if you do not wish to invest in rechargeable batteries immediately.
Hi ,
I wan't to ask that after opening the box can we directly start and run the car or we have to do something (excluding batteries, charging glow plug and connecting remote with receiver).
You have to break in the engine...There is a special procedure - a few tanks of fuel to waste
For more details...watch...http://www.youtube.com/watch?v=4miE6YpgImo
That's right.
For all nitro cars or new nitro engines, break-in procedure has to be done for sure.
This is exactly similar to running a new car or bike slowly until the first service.
hi guys,
I just wan't to ask that when i start buggy the tyres just start moving so can anybody tell me how to set it......And sometimes when the fuel reaches to the engine it goes back to the tank (while starting)....
I just wan't to ask that when i start buggy the tyres just start moving so can anybody tell me how to set it......And sometimes when the fuel reaches to the engine it goes back to the tank (while starting)....
U need to tune ur idling...
Reduce the carb opening
I should tune idling for tyres.....and carb for fuel problem......am i right
Reduce ur idling so that the engine race decreases, which inturn will prevent the car from moving in idle position.
Carb is Carbuerator . You will find the idling screw just under the air filter . Idling screw is a part of Carb which controls the air fuel mixture. Make it a little lean , just enough that the engine doesnt die off.
For fuel problem i think u need to play with ur HSN - High speed needle.
Even i am new into RC Cars , just bought TT Tomahawk ST a week before. Faced similar problems and this is how i resolved them...
Read the manual and set the HSN and LSN accordingly
Hi...........
when I start the buggy the tires don't move but when i pull trigger slightly the engine stops.... :banghead:
Please see this video............
http://www.youtube.com/watch?v=Q9teyq8_wYA
nobody can help me.....plzzzz help
Try turning your HSN (High Speed Needle) anti-clock wise by about half or a one full turn.
Let us know if that works.
hello,
Thank you for all ur help............now also i've one problem with my buggy........when i start the buggy after sometime it automatically move on (and slowly slowly speed increases up to a level).....can anybody help me....how to deal with this problem....... i just want to set my buggy fully so when i pull triger then only buggy move on just like we see in the video.....plzzz help
thanx in advance
please help me......can't anybody help me......
Sounds like your tune is way off. How did you tune your engine? Start the car with the wheels off the ground and see if it sputters and stops when you accelerate. Turn the carb needles to factory position (will be mentioned in the manual or online) and then start tuning from there. Make sure you run the car a couple of laps after each adjustment of the needle. There should be smoke at all times through all rev ranges.
Let us know how it goes.
Checkout the below link:
http://www.facebook.com/photo.php?fbid=393940430640920&set=a.393940427307587.98261.307358759299088&type=1&relevant_count=1
Hi,
Please see this video and please tell me why my buggy is not starting..................
http://www.youtube.com/watch?v=gJdidbdQBhs&feature=youtu.be
please help......nobody knows why it's not starting......
Hi,
Can anybody help me how to deal with these problems. I am not getting how to tune this buggy. I haven't run it nicely from 2 months.
Plz...plz...plz...HELP :'(
Thank You
Send it over to us. Will sort it out for you.
Hi,
I have thunder tiger tomahawk bx.....and I am a beginner. So, I want to know that how to tune my buggy...I'm not getting it...
Thanks For help
Plz.....help..........
Didn't your vehicle come with a manual? Instead of posting on forums and waiting for a miracle, do your research. With nitro, unless you're willing to get your hands dirty, you won't get it running.
Start by reading the manual. All the answers you need will be there. Else google it! Its not that nobody is willing to help you. But putting up generic questions like why is it not running etc. cannot be answered by anyone.
What exactly is happening? Did you run-in properly? Did you check the carb needle settings? Did you check your glow plug for telltale signs of fueling? Is it not holding a tune? There are a million reasons why it won't run. But put in a little effort and you will love it! Half the fun of nitro is in the prep!
If nothing works, have it shipped over to a nitro user who is willing to help you tune it right.
hi,
Is there anybody who can help me in ahmedabad, udaipur , mt. abu....
True.. These things are not on spoon feed basis, everyone here did give some man hours, in this post so many have posted great links , plz follow those links,
Not hurting the feelings, u should have bought electric first, well that case is separate now,,
Send the vehicle to reputed and reliable person here, he will fix it for u
Hi,
I want to convert my Thunder Tiger Tomahawk BX from pull start to electric start. So, can anybody suggest me any electric starter kit which is good and not much costly for my 1:10 buggy.
Thanks in advance. :thanks:
@malviya_divy: This is an universal solution for any 1:10 and 1:8 scale on-road, off-road cars.
Click on the links below:
https://www.facebook.com/photo.php?fbid=569544023080559&set=a.569543993080562.1073741826.307358759299088&type=3&src=https%3A%2F%2Ffbcdn-sphotos-g-a.akamaihd.net%2Fhphotos-ak-ash3%2F919207_569544023080559_1057505598_o.jpg&smallsrc=https%3A%2F%2Ffbcdn-sphotos-g-a.akamaihd.net%2Fhphotos-ak-ash4%2F305785_569544023080559_1057505598_n.jpg&size=1024%2C632
https://www.facebook.com/photo.php?fbid=569544016413893&set=a.569543993080562.1073741826.307358759299088&type=3&src=https%3A%2F%2Ffbcdn-sphotos-a-a.akamaihd.net%2Fhphotos-ak-frc1%2F913771_569544016413893_2076199224_o.jpg&smallsrc=https%3A%2F%2Ffbcdn-sphotos-a-a.akamaihd.net%2Fhphotos-ak-prn1%2F164228_569544016413893_2076199224_n.jpg&size=1024%2C314
PM me for the cost...
Check out this video also on how to use a starter box...
http://youtu.be/Visz6KcoJDY