Just upgraded to a new RCB OS 10 Transmitter and now i am making a new plane with directional rear wheel.
I have added a servo to the rear wheel of plane to taxi the plane before and after the flight...
The servo is inserted in channel 5 and i want to move the rear wheel servo with rudder stick. means when rudder is moved the wheel servo should also move so someone pls help me that how can i mix the channel 4 and channel 5 On RCB os 10 transmitter?
i know that a y connector can be added in channel 4 and then attached to rudder servo and wheel servo but mixing woul be better for me so pls someone tell me if it could be done......?

you can use one servo control rudder and nose gear  and rear

You can use a 'Y' servo lead with two connectors on one end which connects to 2 servos and the other end with one connector which connects to the rudder output on your reciever.