Hi,

First BAD NEWS
=============

All the Tx/Rx set gone.
9gm servos price is no longer cheapest

Good News
=============
After long waiting rubber based products are in display though without complete spec.
But hope, weight and type will be added very soon.
However, 6" or 8" propellers are not available. and even 1/16 rubber too.
====================================================
                                           We want
====================================================

I think, rubber MAT for cutting balsa or wood, TAN sport rubbers of different sizes are required to us.
I have used many rubbers even defective rubber toundicates. But the best rubbers I got from Soikatda of this forum, TAN Sport or TAN-II.
Now, in the rubber items, motor lubricant, rubber strippers, rubber mats, etc. are required and, making a good rubber powered or free flight glider is not as easy as assembling an RC Plane. So, local rubber item shops are required with local cheap items in quantity. Look, you can purchase local plastic toys with same amount of plastics at much much cheaper price. Though prop needs balancing, it easily can be made at user's point and price can be reduced. But as the imported items are IMPORTED, their are costlier.
-=========================================================================

Can anyone give me defective micro servos with Motor? for micro glider. Opening a new servo is difficult to me as I can make  but destroy gives mental pain.
Because,
Does anyone make any cell phone pager motor powered paper glider ? With 50mAh Lipo!
Just try it. You can get items at your nearest cell-phone repair shop and if you have friendship, at least he can not cheat you. I make the prop (20xunknown prop in mm) with Shirt plastic support, cut by Nail cutter and sanding with Diamond file. Center hole made with 6 watt soldering iron but you can use a small needle too. Balancing of Prop is Vital and so pitch adjustment so that it can run at 1/2 to 1/3rd of motor's maximum power (I have burnt brush of 2 motor just overloading it). opening vibrator stub is another issue.
Vibrator Motor=> 35 to 40/-
Bluetooth headset rechargeable LiPO battery =>90/-
Cellphone micro sliding switch => 15/-
You can avoid switch using cellotape switch.

As a paper model, have to dismantle everytime and paper goes to Scrap. Will post pic. next time.

As this is different from RC, so posted in Chatter zone.
Being a interesting to you with less cost involvement, you can try and So I post.

Thanks for reading a long tedious valuless post.

Nice post Kalyan

I urge the other members to give rubber power a try -
although it may not be as "cool" or "posh" as RC - it
it will teach you more about trimming a model. It is also
far cheaper

Kalyan da, do post more about 'cell-phone-pager-motor powered paper-glider'. I would certainly like to try one!

I always shop in Rc Bazaar Bangalore. They are the best RC shops in Bangalore. www.rcbazaar.com

KALYANPRODHAN 
first let me tell you the situation at RC bazaar
1. There are 2 persons to handle the store and the amount of items they are having
are in thousands , i believe there is no Hobby Shop in India who are having so many items
so what happens is that the same two persons have to handle the store answer calls do the testing and check payments follow up stocking inventory management etc

simultaneously working with every thing just for the sake of the hobby and for us, these guys work day and night to keep us updated
i know poor guy even did not have new years eve to take off 

have you ever spoken to the owner Saju (please give him a call) he is a gentle man he takes down the quires and checks that it has been replied back to you also Mr dilip and Shivu both are gem of a persons
2. The amount of stock which he has got takes lot of time to get updated on the the website
they are not IT gurus to do the server updates every time , they have outsourced it and i believe it will be pretty soon updated
3. look at the time they have taken to grow (just 6-7 months ) and off course it will take in more efforts to be fully functional and operational ..

I can say that the persons who have purchased from they would say only Good News and not Bad news from RC bazaar

Now Pricing of 9 grm srvo is 188 .. Its a competition market and everyone has to  survive
at least it is better that previous situation where we had to shell out 350 for the same
he he

Kalyan What can dia and weight in grams you want. I have pager motor, servo motor, and many more starting from 0.9 gms to 3.5 gms from 4mm can dia to 9mm.

I have posted earlier about gear driven prop drives which I have been made with defective servo motors. IR RC Gliders with pager size motors under

http://www.rcindia.org/electric-planes/indoor-micro-flying-under-20-gms-diy-projects/

very well said mr.rajaram. they seems to be working really hard. i saw their stock arrival vid. would love to place another order in near future.

Rajaram +1. Sujjubhai and Dilip have been working their tails off to make this venture a success. Let's have a little bit of patience.

good news        
bad news        

Well Said Rajaram...

The only hobby shop who is giving RC items in low price with good shipping and good support in India is RCBazaar.

+1 rajaram, esp about dilip, he went back home after stock updation at 0100 am in the morning and i gave him a call on his personal mobile at 0600 hrs, and he responded. he didnt have to but he did

All I bought from RCB were 10 pairs of bullet connectors and an order as small as that was given the respect any big order would be given. They're doing all the right things. It shouldn't take them long to rule the Indian RC market. Speaking to Mr. Dilip was a great experience. He was very helpful. I can't wait to go to the store and maybe pick something up. If I move into planes, all my stuff will be coming from there.....

Hi,

# No argument on their service. I can found them and even chat with Dilip even
    at 3AM online. I doubt, Dilip may be ROBOT, Always Online in Night and ready to serve.

# Moreover their shop possibly the busiest LHS with cheap pricing No Doubt. Even the
   RC Enthusiasts who visit Bangalore, gives visit even for their relatives too.

# No argument on the best effort (better is not sufficient) of Sujju Bhaiya as I have
   already talked with him for the opening of Shop in Kolkata but sorry to say that I cannot
   help him finding his required area with low price in rent at Chandni or Near Park Street.
   But presently I think, near Taratolla crossing will be the best place as most of the courier
   zonal headquarters (even Aramax)situated within 2KM. and there are plenty of Space.
   But that entirely my thinking as Sujjubhai's visit and commercial aspect is the main
   criteria to him so that we can get it cheap, quick delivered.

# And finally I have given only a feedback to him so that he can utilize 7Ws.

If I have at least 800 - 1000 sqft area of room or roof, I can offer him to start. So, I just decided to give more attention in repairing and remodeling to my house with my tiny effort.
There are lot of RC persons in Kolkata who can help sujju for dedication to this hobby and with Capacity of their own, but the result is sujju bhaiya can not open in Kolkata.
This may be explained like sujju bhai's cheap price bothers us and we find CHEAP while they search STATUS even in shops too (Pure assumption).

So, I have give a simple feedback and made no mistake i think. You may say head of a 1 rupee coin or tail of 1 rupee coin, but it is actually a 1 rupee coin whatever your viewpoint is.
And above all I don't want to hurt anybody who revolutionize this hobby supply line to my motherland. I just want to help him. and wants to inform others how fast his shop growing that Tx/Rx's are gone out of stock.

There are lot of members in this forum who are dedicated >1000 times than me and hide their status just help others silently and I have no intention to disturb anybody.

SORRY Sujju bhai, I have to open out some personal matter between you and me just to inform that I don't want to hurt you.

and still,


for blaming me.

They are real good..
Had a chance to shop recently wid them...
Gud guys...