When I balance charge my lipo, A few minutes later this error pops up (Attaching photo). Does anybody know if how can I fix this? The balance plug on the lipo is fine and the soldering on the charger looks good. Any help is much appreciated 😊

Thankyou and Regards

it might be one cell is dying

1. test the charger with another lipo.
2. test the lipo with a multimeter , and find individual cell voltages, and total voltage

Report findings here for further discussions .

Quite likely your balance plug is not seated correctly, or has a loose connector

Well mate, I opened up the charger and check with multimeter inside the charger on the soldering leads. The connection is perfect.

I don't have another charger nor another lipo

I'm not sure, The cell counts are unbalanced and I'm tryinf to balance them and I'm unable to do so.

@shuraimkc,
Recently started getting same error, when lipo plugged into correct port, ie, 2s in 3 pin port and 3s in 4 pin port.
But it charges/balances fine when the 2s or 3s lipo is plugged into the 5pin (4s port).

Strange, but true. Try it. Hope it works for you as it does for me.

Can the electronics specialists in this forum please throw some light on the problem?

Regards

Pics of Error msg, and solution!

This is exactly what I do on my charger. When I get such error on my 3S lipo I charge through 5pin port instead of 3 pin port and it works.