How to make a smoke oil

Started by Aero Manoj, February 02, 2017, 08:07:13 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Aero Manoj


K K Iyer

Try attaching a spraybar/needle valve to the end of the muffler.
Feed it kerosene. Suction at the spraybar will pull the kerosene...

Edit
This is an answer for how to make oil smoke, not how to make smoke oil  ;D

saikat

just use pump diesel .... (HSD)


you will get spectacular smoke.


of course - make sure that you heat and atomise it correctly.

I am speaking with experience because out here we do a lot of "fogging"
for malaria and we use diesel as the carrier for the chemical.

flyingboxcar

50-50 diesel and kero. Add some baby oil and smoke on
If you are really into scale you should be here. www.rcscalebuilder.com

Antriksh

Can this method be used with .46 os engine?
Quote from: K K Iyer on February 02, 2017, 09:06:24 PM
Try attaching a spraybar/needle valve to the end of the muffler.
Feed it kerosene. Suction at the spraybar will pull the kerosene...

Edit
This is an answer for how to make oil smoke, not how to make smoke oil  ;D


flyingboxcar

Yes the method can be used but smoke is not guaranteed.
For smoke you need heat and these engines do not produce enough heat to convert the atomized spray of fluid to smoke.
But that should not stop you from experimenting.
If you are really into scale you should be here. www.rcscalebuilder.com