hiii frnds,
after a small crash my motor is bubbling (forward backward) with beep beep, i reconnect all things then its working for some time and again same thing. plz help me whether it is a problem of motor, esc or tx rx. thnx
i wanna add one thing that when i reconnect, its working up to certain throttle position but just before full speed it stops working and my plane falls on groung
i suggest you check the bullet connectors on the ESC and motor! they might be loose so you will need to re solder it!
Thnx naveed
You are right there was same problem as u told. As I remove the sleeves of connectors. I found loose solder.
Now it's ok thnx again
Re calibrate escs
Hello Dear,
i have the same problem, Motor is beeping But the have not flown my plane yet. from start the Motor is Beeping.
I have this motor with me.
http://pakhobby.com/shop/bl-221520/
Waiting for the help
Thanks
Re calibrate your electronic speed controller
i did that. But the problem still remains......
@aviator9991,
Quote from: Mohammed Naveed on January 11, 2016, 01:21:37 AM
i suggest you check the bullet connectors on the ESC and motor! they might be loose so you will need to re solder it!
the problem was in Radio.
i connected the Radio to the Pc which showed me that few channels are not working.