Hi Guys, I want to make my own MPU6050 board but problem is that i can't extract circuit in the form of pdf & png form.
Link :  https://easyeda.com/aeromash/mpu6050
MPU6050 is the heading.
I want top layer and bottom circuit.
I need circuit in the pdf or png.
Thanks.

have you got smd reflow soldering equipment ?

Steps to follow.
1. Click on "Open in Editor"
2. On top left of Editor there will be a folder icon. Click on it and a drop down will appear.
3. Click on export to PDF. It will show a small window and you can select the layers and their color.(Download only layer at any point of time. Don't trust me? Then try with many layers and you will understand)
4. After selection click on export and it will download in PDF format.

In order to solder QFN package you need hot air gun or reflow oven to make your life easier. Soldering with an iron is impossible for me don't know about you.

Quote from: saikat on April 18, 2018, 10:38:01 AM
have you got smd reflow soldering equipment ?

Quote from: saikat on April 18, 2018, 10:38:01 AM
have you got smd reflow soldering equipment ?

I don't have hot gun but smd work will be done because i have access to a mobile repairing shop.

copy the schematic and make it a single sided board layout.

aligning the multi layer board traces and vias by hand in such a small form factor
is going to be impossible.

you are going to use laser print - iron - etch method I suppose.

Mpu6050 board have circuit on both side. I mean double sided.
Actually problem : i cant extract exact schematic from easyeda.
GND TRACE HAS WHITE COLOR WHEN I EXPORT PDF THM GND TRACES ARE NOT IN SCHEMATIC PDF AS GND TRACE ARE OF WHITE COLOR AND OTHER TRACES ARE OF BLACK COLOR IN EASYEDA.
PLEASE HELP ME. I ALREADY ATTACHED LINK. WITH POST
CHECK THAT LINK