Please check my parts compatibility, this is my first FPV quad build so i am a bit all over the place

my parts list:

FC & ESC combo: https://www.quadkopters.com/product/flight-controllers/mamba-f405-mk2-flight-controller-rev35-35a-blheli_s-2-6s-4-in-1-esc/

Frame: https://www.amazon.in/Robodo-QAV250-Glass-Quadcopter-Multicopter/dp/B07DDHKW1B/ref=sr_1_5?crid=2FJG2BXCH22WP&keywords=quadcopter+frame&qid=1575807087&sprefix=quadcopter+%2Caps%2C307&sr=8-5

Motors:
CW: https://rcmumbai.com/racerstar-racing-edition-br2306s-2700kv-cw-brushless-motor.html
CCW: https://rcmumbai.com/racerstar-racing-edition-br2306s-2700kv-ccw-brushless-motor.html

Camera and VTX combo(i am not sure about this, give suggestion if in same price range): https://rcmumbai.com/catalog/product/view/id/2681/s/betafpv-1200tvl-vtx-camera/category/32/

RX: https://www.quadkopters.com/product/tx-and-rx/frsky-xm-sbus-non-telemetry-receiver/

TX: Turnigy 9xr with frsky djt module

Goggles: https://www.quadkopters.com/product/fpv-kit-and-accessories/ls-008d-fpv-diversity-goggles-with-dvr/

Battery and charger i have no idea so please give any suggestion for 4s with charger which you think would work well for the above build

I am just starting out so i am trying to build a fun fast drone purely for entertainment, also no matter how small of a thing i am missing please let me know.

Thanks

Vtx you selected outputs only 25mw power.  Not sure if it's enough when flying outdoor. Others can comment.
If you buy r-Xsr over XM+ you get telemetry options. Might come handy.

Ok thank you, which vtx would you suggest?

Quote from: monkey.d.roger on December 09, 2019, 09:46:43 AM
Ok thank you, which vtx would you suggest?

I have used eachine vtx03 and eachine tx806.
Both are good.
Vtx03 is small and goes only up to 200mw
Tx806 is regular size goea up to 1w also got smart audio.

The tx you chose is suitable for your quad but you may consider below post to choose right transmitter for your budget in 2019.

http://www.rcindia.org/chatter-zone/beginner-set-up/msg303577/#msg303577