Wrong happened with my laptop when trying to balance lipo with TP4056 module.
Now i am getting black screen. Today, I need to do testing of YMFC quad but unfortunately this thing happened with me.
I powered  TP4056 module from usb cable which is conntected with my laptop and when i connect pin of TP4056 module to my lipo 3s 2200mah then my laptop was turned off and led was not flashing at that time.. now I am getting black screen I am writing this post from someone's laptop. I removed pins from lipo and my lipo is save i think it's a short circuit.
If same thing happened with other then please tell me solution for my laptop.
I know this forum is not laptop solutions and fix but your little help can save my money.
Thanks.

Have you tried this

Maynot be a short circuit. The LiPo would have been damaged then.
Was the tp4056 hooked up to balance a single cell?

Yes, I used TP4056 to balance a single cell out of 3 cells of my lipo battery.
But unfortunately, my laptop damaged and now  problem is coming to balance lipo with 12 V bulb

Had a similar problem. Fried my laptop's motherboard.

@Aravind298
Your laptop is fixed? if your laptop problem is solved then please tell me solution.
This is my 1st laptop and i don't want to loose my 1st laptop.

Hi, take it to a service center.