Print Page - Problem with RCB6i

Title: Problem with RCB6i
Post by: rohith_haritatsa on February 14, 2017, 11:45:55 PM

I'm having a RCB6i Tx which I bought it a month ago.
The 2nd channel is not working, nothing wrong with the cable or the servo, I have tried with many of them.
It was working when I had just bought it.
I have tried the calibration and ID and nothing seems to work.
Please help me out here.

Regards,
Rohith.

Title: Re: Problem with RCB6i
Post by: Aero Manoj on February 15, 2017, 10:40:45 AM

Contact rcb they will help you

Title: Re: Problem with RCB6i
Post by: rohith_haritatsa on February 15, 2017, 10:49:59 AM

@Aero Manoj
Yes I did and they suggested calibration but it doesn't seem to work.

Title: Re: Problem with RCB6i
Post by: Aero Manoj on February 15, 2017, 10:53:31 AM

Better you send the TX to rcb they will check the problem and make it works

Title: Re: Problem with RCB6i
Post by: rohith_haritatsa on February 15, 2017, 10:54:39 AM

Yes I'll do that. Thank you!

Title: Re: Problem with RCB6i
Post by: Aero Manoj on February 15, 2017, 10:56:00 AM

Welcome :hatsoff:

Title: Re: Problem with RCB6i
Post by: Tanmay.mathur on February 17, 2017, 02:05:35 AM

Looks like the analog read wire from the ribbon wire is damaged .
Rarest problem cause the TX uses high quality Silicone wires for gimbal connections.
Better to send it back to rcb

RC India

General Topics => Chatter Zone => Topic started by: rohith_haritatsa on February 14, 2017, 11:45:55 PM