Hallo Friends.
Here is my second entry for this Sweepstakes. Making Pitts S1 from coro. Plan downloaded from rcgroup.com.
Wing = 700 mm
Fusage = 600 mm
Electronics doesn't decide. Depending on weight of model.
Challenging build {:)} {:)}
It'a great flier :thumbsup:
Friends.. Print out the plane but now scale is big. I want to make little big size model. So now..
Wing : 1050 mm
Fusage : 850 mm
Thank u Sanjaybhai...
Making Wings first. Cut 2mm coro from plan. Its ribs from 2mm balsa.
And first colour the wings....
Very good titil saras {:)} {:)} {:)}
Very Nice...
Carry on...
Thank you gaurang.1972 and runik4...
One Wing is ready...
Some more...
Both Wings are ready..
:thumbsup: :thumbsup:
What thickness corro? And the ribs are balsa? Thickness?
Taitil great going and good tech to mix coro & balsa.
If i see closely both upper and lower are cut same size which is y the upper coro is bit small or it was planned that way?
Any aileron in this plane?
nice build! how did you color the coro?
Vinyl stickers
Thank u topalle rastsaurabh..
Sanjay sir, the ribs are made from 2mm balsa. And use 2mm coro. In first wing, i used double 2mm balsa in middle and in second wing, light weight 12mm aluminium rode. Total weight for two wings with two 9gm servos is 295gm. Not vinyl, I use regular 2 inch sticky tape for colour. See closely.
Yes Saurabhbhai i cut same size coro. I put servos in lower wing for Aileron.
Out of curiosity what are those pink yellow material at the background in Weigh scale picture??
Is it Foam (:|~
Yeah I think :P
They look like those foam floaters that are used in swimming pools by kids :giggle:
Very nice.. :)
Can u pls give ur contact no taitil..I also want to make one of this..
Thank u sunny...my number is 9879179769. .
Yeah Saurabhbhai, its foam.. using inside sofa.. its my business of making bike seats..covers..car seats..sofa and others...
Now its fusage time..
Making tail first..
Some more updates. .
Something very good coming out
More updates...
Using Turnigy D2836/8 1100kv motor..35amp esc..
installed bettery tray..
Installing wings...
Model is near to ready..
Beauty! {:)}
What thickness corro did you use?
Ultimate taitil bhai...waiting for fly video
Thank you Saurabhbhai and Thank you Sanjay Sir.
I m uses 2mm coro. Used double 2mm coro in elevator and Rudder.
W :salute: :salute:well done
Thank you Anantbhai...
Aow without bettery 845 gm..
beautiful build. waiting for flight video
Pretty plane.....:)
Sent from my ASUS_T00J using Tapatalk
Looking Very good taitil and yes waiting for flying video {:)} {:)} :thumbsup:
Thank you Sundaram...Ramarao and Gaurang....
Here is flying video.. biplane flying very well....
First i used three blade prop. Bur not get enough power. So i changed it and use 11×7 prop.
Also made cockpit with pilot :giggle: :giggle:
https://youtu.be/6lF-0Fssc04
https://youtu.be/AwHdz2rypFs
https://youtu.be/f-EzRkq3qtg
Nice build and flight.
cute model ;D
Many many congratulations Taitil-bhai :goodjob: :goodjob: {:)} {:)}
Not an easy model to build, or fly
Really well done :thumbsup:
GREAT
Thank you Very much Suyash, swapnil, Anant and Sanjay Sir...
Yes sir, when you first told me that this is Challenging build, i thought it would not. But i realise that this was really challenging build. And now i m very happy to made this. I made little mistaken in lower wing. I used very thin balsa stick. So wing gone little bend while flying. Now i give it stick for supports and make it strong.