Insane aerobatics with the flavour of slow flights, the all new 'Mini 3DX' is going to prove it's worthiness with its outclass abilities.
Specification:
Wingspan-32"
Weight: will be updated
AUW: will be updated
Servos: 2×2g & 2×4.3g
Battery:7.4v 500mah lipo
Motor: Sunnysky x2204 kv1480
Esc: Hobbyking 10A
Material:3mm non laminated depron

Looks good 

All the best

Sanjay sir,

Starting of with the fuselage.
The layout in cut out from 3mm non laminated depron.

Snaps showing the elevator joint.

Some progress on the fuselage.

Building the wing. Ailerons are cut out along the wing to make the hinge joint.

Close up's of aileron joint. Used some clear tape for hinging, works well.

A pleasure to see the neatness and quality of workmanship 

Quote from: K K Iyer on October 29, 2016, 08:01:00 PM
A pleasure to see the neatness and quality of workmanship 

Great to hear that, thanks!

Fixing the wing and the horizontal stabiliser on to the fuselage. Reinforcement would be done later with cf.

The airframe is almost completed. Now just have to add the rudder with hinges.

Bare weight of the airframe.
39g

which foam is it?

It's depron

Making the motor mount.
Motor mount is made out of PCB board and it is hot glued to the fuselage.

Securing the servo's in place.

Mounting the esc.

Reinforcing the fuselage.Using 1mm carbon fibre rods.

Control rods...

.

Decals.

Ready to fly!
AUW-120g with lipo

Video...

Excellent. Bit more practice, and you'll be doing a perfect Hover