Hello,
So, for the 2016 sweepstakes, i have decided to build a parkflyer-come-SPAD.
Designed by extremesports on RcGroups. It appears to be a stable aircraft. Sporting an undercambered wing which has been extended to 42" from around 39" as i got the print scaling wrong by 2%.
Using a Emax 2282 1200kv "red" motor and a 8x4 prop (APC style)
A 30 amp SimonK esc
2X TowerPro Cheap 9 gms servos.
I am thinking of getting a 1100 mah lipo (3 cell).
The wing is almost done. Used Cf rods in the Le and Te flutes, balsa spars in the middle. Additional reinforcements have been made in the center section.
I am planning for a clipped wing design and non transparent windows.
Regards ;D
(https://s22.postimg.org/fxsfy7oel/IMG_20161010_105536.jpg) (https://postimg.org/image/fxsfy7oel/)
(https://s22.postimg.org/qys6gz619/IMG_20161010_105543.jpg) (https://postimg.org/image/qys6gz619/)
(https://s22.postimg.org/lon7polsd/IMG_20161010_105603.jpg) (https://postimg.org/image/lon7polsd/)
(https://s22.postimg.org/6h785btxp/IMG_20161010_105605.jpg) (https://postimg.org/image/6h785btxp/)
(https://s22.postimg.org/4dwsxnu4t/IMG_20161010_105629.jpg) (https://postimg.org/image/4dwsxnu4t/)
(https://s22.postimg.org/4f6qr2vyl/IMG_20161010_105703.jpg) (https://postimg.org/image/4f6qr2vyl/)
(https://s22.postimg.org/l486mzsjx/IMG_20161010_105741.jpg) (https://postimg.org/image/l486mzsjx/)
(https://s22.postimg.org/yc7kfxq31/IMG_20161010_105746.jpg) (https://postimg.org/image/yc7kfxq31/)
(https://s22.postimg.org/6st9vtzrh/IMG_20161010_105750.jpg) (https://postimg.org/image/6st9vtzrh/)
(https://s22.postimg.org/sx3fspnwt/IMG_20161010_131231.jpg) (https://postimg.org/image/sx3fspnwt/)
(https://s22.postimg.org/lie40c219/IMG_20161010_131232.jpg) (https://postimg.org/image/lie40c219/)
(https://s22.postimg.org/no8euu5hp/IMG_20161010_133652.jpg) (https://postimg.org/image/no8euu5hp/)
(https://s22.postimg.org/z1uy61g0d/IMG_20161011_090754.jpg) (https://postimg.org/image/z1uy61g0d/)
(https://s22.postimg.org/bowwnizwt/IMG_20161011_100944.jpg) (https://postimg.org/image/bowwnizwt/)
(https://s22.postimg.org/rbsren32l/IMG_20161011_100955.jpg) (https://postimg.org/image/rbsren32l/)
(https://s22.postimg.org/wbq7ml8p9/IMG_20161011_101033.jpg) (https://postimg.org/image/wbq7ml8p9/)
(https://s22.postimg.org/52eu837m5/IMG_20161011_101037.jpg) (https://postimg.org/image/52eu837m5/)
please open the images in a new tab for bigger, better resolution
The link to the plans:
<a href="http://www.rcgroups.com/forums/showthread.php?t=1959141">Original plans</a>
Good going there prabal.
what i have seen on this cambered wing is that , in turns the wing drops drastically, and stalls.
i don't know that happens with me. or its normal.
Thank you sir, let's see what happens
Very good going prabal
Thank you sir:)
I have put formers on the fuse.
Manoj sir, can i have a video of your plane?
The beginning looks promising.
thanks :)
Great start! All the best... :thumbsup:
thank you kiran ;)
Good going Prabal
Thank you sir,
I am on the verges of completion of the fuselage.
Will post images at 9