Text only | Text with Images

RC India

RC Models => Electric Planes => Topic started by: docnayeem on March 12, 2016, 10:38:24 PM

Title: 'Flying Whale'- My design a Pusher Trainer
Post by: docnayeem on March 12, 2016, 10:38:24 PM
Hello all,
As a beginner always hunted for a easy to construct Pusher ( To protect electronics coz of frequent crashes ) couldn't find much.
Years after designing one on same lines 'The Flying Whale '

Construction Material:
Coroplast
Biofoam
Power setup : Yet to decide, will do that once I get the final AUW.
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: drnayeem on March 12, 2016, 11:18:12 PM
The Fuse
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: drnayeem on March 12, 2016, 11:24:15 PM
Fuse in 3 mm coro
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: drnayeem on March 12, 2016, 11:29:57 PM
Wing in 8 mm Biofoam
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: drnayeem on March 12, 2016, 11:32:03 PM
Wing bent for winglets
Slot for the Motor and Prop.
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: rcrcnitesh on March 13, 2016, 03:02:54 PM
Why don't you check out this plane designed by Extreme Sports? http://www.rcgroups.com/forums/showthread.php?t=2194226&page=3 (http://www.rcgroups.com/forums/showthread.php?t=2194226&page=3)
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: sanjayrai55 on March 13, 2016, 08:03:00 PM
Very interesting :D
Title: Re:
Post by: rcrcnitesh on March 13, 2016, 11:28:33 PM
I guess your plane is asking for more reinforcements.
Title: Re:
Post by: docnayeem on March 16, 2016, 01:40:28 PM
No Nitesh the geometry itself gives it the rigidity required ... Shouldn't ask for more.  :)
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: drnayeem on March 16, 2016, 01:45:52 PM
Model CompleteWing Span 36 "
Cord 7 "
AUW 440 gms
Cube wing loading 6.8
Motor Emax 2812
Esc 20 Amp
Prop 7*4
Battery 1300 mAh
Title: Re: 'Flying Whale'- My design a Pusher Trainer
Post by: Tanmay.mathur on March 16, 2016, 01:49:45 PM
Vids would be nice .
Eagerly waiting
Text only | Text with Images