hey... i have a few dumb questions which i couldn't find the answer for.. (i searched) hope someone can help... :)
Q1: what will happen if i connect a 25-30A esc to a motor of recommended ESC 20A??? (or put a high Amp ESC to a low amp motor)
Q2: what will happen if i put a 6 x 4 Prop on a motor that has recommended size 10 x 4 ???
thanks,
Aniket
nothing will happen if u connect 25-30 A esc to a motor with recomended esc 20 A . its always good to keep small margin so that your esc should not become too hot or fry, while supplying max power to your motor.
normally motor with recommended prop of 10x4 have low kv. so if you connect 6x4 prop it will not give you enough thrust.
oh.... so in the case of emax cf2822?
i have a 8x6 prop at home... is it good for this motor?
yes it will be best for that motor, i can take 9' prop also.
beleive me this is one of very good motor.
Ankit you must use an esc which is higher rated than the Max amp rating of the motor.. you can use a 100A esc with a 25 Max amp motor with ease... the only problem is weight and price..
And prop if a motor has a 10" prop recommendation it can work best with that prop.. using below that will decrease the performance...
Sent from my Canvas using tapatalk 2
Cf 2822 I am always using with a 1047 and 30A esc... best combination...
Sent from my Canvas using tapatalk 2