RC India

RC Models => Electric Planes => Topic started by: Veeramanikandan on March 23, 2018, 06:34:01 PM

Title: 11'' inch micro Bipie....
Post by: Veeramanikandan on March 23, 2018, 06:34:01 PM
My recent scratch built 11''inch micro Bipie..
Made with 2 mm foam
820 brushed motor
1.7g servo
Mini Flysky AFHDS Compatible 8CH Receiver
Tattu 1s 350mah battery
AUW 45g...

https://www.youtube.com/watch?v=wBrd7eFCKY8
Title: Re: 11'' inch micro Bipie....
Post by: romanxdsouza on March 23, 2018, 07:05:22 PM
neat build....any links to the electronics
Title: Re: 11'' inch micro Bipie....
Post by: Veeramanikandan on March 23, 2018, 07:37:05 PM
Thanks romanxdsouza... :)

Here is the link for the electronics....
Motor:
https://www.banggood.com/Coreless-Reducer-CW-Motor-Propeller-Combo-Set-For-RC-Models-DIY-p-998786.html

Receiver:
https://www.banggood.com/Mini-Flysky-AFHDA-Compatible-8CH-Receiver-PPM-Output-With-1mm-JST-Socket-For-DIY-Micro-Quadcopter-p-1097424.html

Servo:
http://hobbypep.com/shop/servos-and-parts/servos-3/

Lipo:
https://rcmumbai.com/review/product/list/id/1676/
Title: Re: 11'' inch micro Bipie....
Post by: romanxdsouza on March 23, 2018, 08:47:03 PM
thanks veeramanikandan very nice builds..........banggood do you recieve your order on time??? shipping??
Title: Re: 11'' inch micro Bipie....
Post by: rastsaurabh on March 23, 2018, 09:13:34 PM
Really clean built....

Does the rx drives motor directly.... i mean what ESC is there in between rx and motor.

regds
Title: Re: 11'' inch micro Bipie....
Post by: Veeramanikandan on March 23, 2018, 09:49:51 PM
Thanks rastsaurabh.... :)

Integrated with 5A brushed ESC..
Title: Re: 11'' inch micro Bipie....
Post by: K K Iyer on March 23, 2018, 09:51:42 PM
@veeramanikandan,
Sir,
I wish that all newbies building their first model in depron with hot glue etc,
would look at your small models,
and realise that one of the basic requirements for success is
neatness and quality of construction
Red and white becoming your trademark?  ;D
Regards
Title: Re: 11'' inch micro Bipie....
Post by: romanxdsouza on March 23, 2018, 10:24:17 PM
Quote from: K K Iyer on March 23, 2018, 09:51:42 PM
@veeramanikandan,
Sir,
I wish that all newbies building their first model in depron with hot glue etc,
would look at your small models,
and realise that one of the basic requirements for success is
neatness and quality of construction
Red and white becoming your trademark?  ;D
Regards
agreed....
Title: Re: 11'' inch micro Bipie....
Post by: Veeramanikandan on March 26, 2018, 11:52:28 AM
Thanks KK iyer.... :)
Thanks romanxdsouza.... :)

FT Mini Sportster is the reason for Red&White.... ;D