This will be my first entry for 6th sweepstakes.

This is my first build log.

1st day I was only able to spend only  1 hour today so finished cutting the rib set.

more pics

Good job on properly documenting the build with date references

Should turn out to be a beautiful build too.

Subscribed

Quote from: anwar on June 15, 2015, 09:22:18 PM
Should turn out to be a beautiful build too.

+1
sub'd

Should be fantastic! Could you post some specs - span, length, expected AUW, Power Plant etc?

@Anwar  @sundaram @rcpilotacro @sanjai rai -   Thanks you sir

specs

span - 35.6 inch
length - 28.5 inch
AUW - 700 to 800g approx

Havent decided the powerplant yet confused between glow or electric.
If glow cox TD 049
If electric then equivalent motor.

would decide later.

@ 800 grams, or 2 lbs, as a low wing war model, this would need upward of 250 Watts by my reckoning. The Cox will give you far less power.

@ sanjai rai  sir this is the specs given in plan

Todays progress

more pics

postively looking for final product/ mustang

kamal preet

Wing completed

@jana.f22
Looks great 
In the left wing centre section sheeting is that an ink line or a joint?
A joint is not desirable.
Do you have a TD .049 or .051?
On 25% or so nitro, the will be perhaps twice as powerful as a BabeBee.
Ask Sundaram sir.
BTW, what is the source of the plan? How old?
By current standards 7-800gms for a 36" span is quite high.
My 36" depron Spitfire was 330gms, and had out of sight vertical with a 200watt motor producing 660gms thrust on a 9x5 prop.
Best wishes.

@ kk Iyer its a joint sir.
I have TD .049
The plan is from outerzone its rcm plan.

http://www.outerzone.co.uk/plan_details.asp?ID=5130

Yes its quite heavy for this size but My friend made a P51D marutaka plan same 36inch it weights around 900g and it powered by electric still performance is flawless, so ill go with electric most probably.

thats a really fast build..... great going

@shobit17 thank you sir  am planning to finish and maiden this by this week

Todays progress

Ailerons cut, torque rod installed for ailerons, aileron servo installed & undercarriage installed.

jana, the build is coming up very well.
Are those hardwood blocks for the l/g under the wings

Best wishes...... you may like to take notice of the advice given by Mr Iyer..... the joint is not desirable at the place he is talking of..... because it is a place where a lot of weight gets centered due to higher wing loading in turns.  You may like to give a reinforcement by using a thin nylon cloth pasted there with Epozy.... some 3 inch wide piece of cloth would be fine.  Nest time do avoid such a joint.

@girishagarwal  Yes its a hard wood block.

@shohit17  sir ill be sticking a fiber glass cloth with epoxy over  the entire mid section for strength for reinforcement.

Coming along nicely 

Glad you are going electric

  

Wow...Great going jana Ji....

Best of luck. I didnt noticed its yours.

Ashok.P

@ Ashok ji thanks, anyway you will be there during my maiden.
@ Darshan thank you

wings completed just have to do covering work.

fuse work started.