Print Page - 32" inch "Mini Piper Cub"

Title: 32" inch "Mini Piper Cub"
Post by: Veeramanikandan on March 26, 2018, 05:21:28 PM

Scratch built 32'' inch Mini Piper Cub...
Made with 5mm foam,
Emax 2204 2300kv Bl,
Emax 12amp esc,
6x3 Prop,
2x 9g servo,
850mah 3s lipo
AUW 325g...

Title: Re: 32" inch "Mini Piper Cub"
Post by: rastsaurabh on March 26, 2018, 05:30:41 PM

Very Nice finish.
What foam is this and how you are strengthening wings ... Spar ??
what is red color .. tape , color, mono-cote ?

regds
Saurabh

Title: Re: 32" inch "Mini Piper Cub"
Post by: Veeramanikandan on March 26, 2018, 06:01:25 PM

Thanks Saurabh... :)

This is non laminated and onside coloured foam got from itsy bitsy,
I have covered with red and transparent cello tape..

look at the image for wing spar...

Title: Re: 32" inch "Mini Piper Cub"
Post by: romanxdsouza on March 26, 2018, 11:09:18 PM

Good build....i used to used the tape thingy too...it really holds well

Title: Re: 32" inch "Mini Piper Cub"
Post by: Ahamed on September 18, 2018, 10:06:47 AM

Can you please share the plan

Sent from my ONEPLUS A5010 using Tapatalk

RC India

RC Models => Electric Planes => Topic started by: Veeramanikandan on March 26, 2018, 05:21:28 PM