This is my First scratch built airplane. The plan is BLU DART. i m currently making it. i had just made the body of the plane. I ve ordered some of the RC goods from Hobby king. Thanks to VC for his suggestion  . I ll post the video of the maiden flight very soon in a couple of weeks. Here are the details of the plane:

1.Turnigy 28-22-azj 7A 1400Kv Brushless Outrunner
   http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=2107

2.GWS EP Propeller (RD-8043 203x109mm)
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10048

3.Hobbyking SS Series 15-18A ESC
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6456

4.Turnigy 1370A Servo 3.7g/0.4kg/.10sec
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7476

5.Turnigy 500mAh 2S 20C Lipo Pack
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9187

That's very nice of you to post the details.

Wait for the maiden flight details.

Great to see the model Akshay! Its a good start. Is that the foam you recently bought ? It is Styrofoam isn't it ? Not Depron/Biofoam. I would suggest you to completely  cover the plane with Clear Scotch tape, before putting some fiber Tape on the leading edges.

You ESC looks over kill and LiPo just little under kill for the motor :

I would have suggested the below ESC:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=2161

and below LiPO:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=7292

Nevertheless you setup is still good  to go.

All the best and hope to join you for the maiden.

Ujjwaana you have been seeing Cricket match while posting this reply, I suppose you have mixed posts in one. 

Quote from: Akshayb on March 12, 2011, 07:24:20 PM
Ujjwaana you have been seeing Cricket match while posting this reply, I suppose you have mixed posts in one. 

hahahaha

Guys.. Can i use this Battery and ESC and battery instead of that old one i posted.

Battery: http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9170

ESC: http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6548

yes u can.what is the material that you had used for the build,is it thermocol?

i have a 1500kv motor,8040 prop and 2s lipo 1000mah,and 30amp esc,im a beginner too,guys can anyone help me to make a beginner plane? i tried a corostick it weight 615gms it didnt flew  im totally disappointed,any suggestion to make a small and normal plane with thermocol?

Raghav,

Post some more details on its span, length etc, also your experience, honestly, this may not fly well, there will be controllablity issues, post some data, lets us study it properly

i had made that with thermocoal... Here are the plan Details... i had followed this tutorial
http://www.youtube.com/user/flitetest#p/u/9/7i9g-x7T6_I

Harsha please meet someone personally. It helps.
I am a beginner too - things seemed a lot better after i made aeromodeller friends in blore.

hey guys.. can i buy this tx and rx .. is it good???
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8338

pls tell ur suggestions..

I have that one. It is good. Buy one locally if possible from praveen or aman_funny to avoid problems with customs

will there be any pbms with the customs   In hobby kings, it costs only $23 but if i buy locally in any hobby shop in chennai or nearby it costs more than 2000 rs

Hey its $23  + shipping ( $17.95 ). Plus you will need to buy the USB cable for $2.99.

$23+$17.95+$2.99 = Rs.2024

hmm. thats notable... is anyone ready 2 sell their old used or any new Tx and Rx under rs 2000?

Hai Friend..its a nice and stunning craft...thanks for the idea...and sharing..best wishes for a best flying...

Raghav sorry to give it to you straight. This won't fly well. I doubt will it fly at all. You need to look at some straight wing long wing span aircraft. Don't waste your electronics on this .
Just a friendly advice

oh..god...