Hi. I have a HK Bixler 1.1. One of the aileron servo stopped working so i replaced it with a Turnigy 9g servo. However now both the ailerons move in the same direction.. Plz help. I have a Flysky 6 channel TX and the bixler was an RTF mode 2.

just flip the servo arm and servo iteslf....

doesnt work. Already tried that.

post a pic it would be easier for us.

Either get yourself a servo reverser or with some soldering.

Before the servo replacement there wasn't a servo reverser. So why now ? Would like to know what you meant by using a soldering iron

flipping the servo wiil work - use your logic

suppose four corners of servo looking from top with the output shaft away from you
are A,B,C,D clockwise

now flip in such a way that B will come to position D

if you are using 1 channel for every servo, reverse the servo from TX . use Flysky manual.
Ashok.P

i fixed it. Thanks for your help