Hallo friends.
This is my second entry for this sweepstakes. Really i too much enjoying this time.
My second entry is "Air India Passanger Plane". Will make it by coro. Here is the scratches of it.
Wing Span: 47.0"
Length : 51.0"
First making of Wing.
Shape and cut the wing by coro. Using 0.5 inch Alluminium rode for strong it.
hmmmm this will be nice to watch....all the best :salute:
excellent! best of luck!
which model is this? from the hump on the fuse and the shortness in length, i suspect its a 747-400.
will u use edf'F?
hello guys i m sonu new here
guys i have recieved a letter from customs about my quad copter
they say it is more than 10,000 rs but i bought it in 4500
what should i do
help me please
post on a new thread..
Thank you Roman and @prabal276.
And Yes prabal276, your suspect is right. I am using 747-400 model scale and will use edf at back like BWIA plane. Will mix this two plane.
Taitil-bhai :salute:
excellent!!
keep going!
any updates?
Thank you Sanjaybhai and @prabal276.
Yes here is more updates. Wing is ready.
More...
excellent!!
keep it coming
Making round from shoe inner sole for fuselage..
Some more for motor...
Making Radar and Elevator from hd thermocol. ...
Taitil-bhai, what is this black material?
Sanjay sir...i guess its a dense light weight foam...usually used in footwear industry
I had made wheels out of it for some of my models.
Its extremely strong and durable too...
Yes @madaquif. Mostly its use in footwear industry. It is high dense, very light weight, strong and flexible material. I also make wheels out of it. Using stitching machines wheel at middle. Cut it from middle and stick both side of foam. See this...
More updates....
Making Fuselage ...
For cockpit...
More updates
Some more....
Its time to ready model... Remaining setting of electronics..
Electronics....
Turnigy L2855-2800 EDF Outrunner (630w)
Zippy 1000mah 25c 4s bettery
Turnigy 9gm servo. No 4
40 amp esc
Excellent sir..
maiden??
Thank you @prabal276.
Maiden will tomorrow.
Great Build sir ! Waiting for maiden
maiden??
tomm.?
Gone for maiden but not successful. Total weight of model is 1150 gm and motor did not pull it properly. So poor maiden. Have to modify it and will set two motors on it. So for this sweepstakes, it is out.. :banghead: :banghead:
https://www.youtube.com/watch?v=DJXY4dllRP0
beautiful.... :thumbsup:
plz post some flight vids...