Main Menu

BLUCUB 2 build log

Started by nilharsh, November 29, 2014, 08:31:29 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

nilharsh

Next 2 pics are of real one .
GOOD OLD NILHARSH

K K Iyer

Wanted to see if wing has
1. Camber
2. Dihedral

Going flying now!
Will respond after 7pm.

nilharsh

Sir unable to post pictures here,
They say can't post more than 200kb
GOOD OLD NILHARSH

nilharsh

No there is no dihedral,
Flat only airfoil.
GOOD OLD NILHARSH

shijin ps

Spektrum dx9,Turnigy 9x,walkera,HK t6, Skysurfer v3,yak 54 3d,custom made Tricopter,HK Parafoil,Hausler 450 heli,hiller hover 450 heli,Ornithopter,

K K Iyer

Then you may need to cut two grooves at say 3" and 6" from LE, and glue in bamboo skeewers like these (kabab seekh!)

nilharsh

GOOD OLD NILHARSH

nilharsh

Hello which airfoil should I use,
GOOD OLD NILHARSH

nilharsh

Template says that bend the wing with heating,
GOOD OLD NILHARSH

rcrcnitesh

Maker | Aeromodeller | Teenager

kiran rc

Yes, you can bend using heating.Even flat wings will work but dihedral wing can handle wind better!

nilharsh

Thank you guys,
Wing bended
Is that enough
GOOD OLD NILHARSH

nilharsh

Hinges done ;)
GOOD OLD NILHARSH

rcrcnitesh

No you need to bend more.
Maker | Aeromodeller | Teenager

nilharsh

GOOD OLD NILHARSH

nilharsh

Does anyone has a used rx tx,
I don't have enough budget now so buying used one,
Only rx will also do.
GOOD OLD NILHARSH

sahilkit

which make RX are you looking for ? and did you cut 45deg bevel on the control surfaces ? cannot see clearly in the picture.
Today might be a great and wonderful day. It depends on you.

sanjayrai55

"Wing bended. Is that enough."   "No, you have to bend more"

Come on guys, you are supposed to be aeromodellers. What kind of talk is that?

Simply: Bend one side of the wing to an angle of ..... degrees
Or create the dihedral by laying the wing flat and lifting one half to a height of ..... mm above the level

nilharsh

Quote from: sahilkit on December 01, 2014, 05:10:54 PM
which make RX are you looking for ? and did you cut 45deg bevel on the control surfaces ? cannot see clearly in the picture.
Hello sir looking for rx for hk6ch v2 tx
GOOD OLD NILHARSH

nilharsh

Quote from: sanjayrai55 on December 01, 2014, 05:19:08 PM
"Wing bended. Is that enough."   "No, you have to bend more"

Come on guys, you are supposed to be aeromodellers. What kind of talk is that?

Simply: Bend one side of the wing to an angle of ..... degrees
Or create the dihedral by laying the wing flat and lifting one half to a height of ..... mm above the level
Sorry sir ;D
First model
GOOD OLD NILHARSH

rcrcnitesh

Sanjay  sir you can't call me a modeller can you
Nowhere cocompared to you.

BTW from bend it more I meant to simply make it more underca mbered.
Maker | Aeromodeller | Teenager

sanjayrai55

RCRN:

You are a modeller. A budding one, but nonetheless a modeller  8)

sahilkit

Today might be a great and wonderful day. It depends on you.

rcrcnitesh

Thank you Sanjay Sir, But I don't consider myself a full modeller.
Maker | Aeromodeller | Teenager

sanjayrai55

You mean like a half-cooked egg? Functional, but runny at the edges  :rofl: :rofl: :rofl: