this is how you learns, btw soldering is a must have skill for electric flyers, master it, you won't regret.

Come on you experienced modellers ,
Guide me through my 1st model

Quote from: sooraj.palakkad on December 03, 2014, 01:58:23 PM
this is how you learns, btw soldering is a must have skill for electric flyers, master it, you won't regret.

Right

You want guidance in soldering or modelling ?

Quote from: sooraj.palakkad on December 03, 2014, 02:00:53 PM
You want guidance in soldering or modelling ?

Modelling,
You posted reply while I was writing

But there is one thing,
I'm able to contact all modellers through rcindia,
1from kerala other from rajasthan.
How nice.

See the mess I made

Going back to work

I would recommend getting 3.5mm bullet connectors for the motor and esc and ec3 for the battery and esc.

EC3 are same as bullet.

I soldered bullets with ease. (1st time soldering anything) (youtube)

Motor esc is combo,
So do I need to join them

hey, a motor ESC combo don't mean it is pre connected, but some times it may have bullet connectors pre soldered though.

Hello sooraj,
Here it seems that it is pre connected
http://hobbysea.com/products.php?511&cPath=43&sid=590ce36248badc1caba93988ac2d2922

Is this a esc or a bec,
http://hobbysea.com/products.php?511&cPath=43&sid=590ce36248badc1caba93988ac2d2922

Most ESCs these days have an integrated BEC. The red and black wires of the servo type lead that come out of the ESC make up the BEC. It seems that you should do some reading on electronics. I would recommend this:
http://www.instructables.com/id/The-Complete-Guide-to-RC-Electronics/

yeah, your HK donkey seems, comes fully paired !!

Thanks

who suggested this power system?

Iyer sir,
Why is anything wrong with this

My phone number
8446203709
I'm on whatsapp

No, nothing. jus' asked, But the setup is some what in costly side, what are the alternative motors that can be used ?

Quote from: rcrcnitesh on November 30, 2014, 01:41:54 PM
instead of the hk6ch get the rcb6i you won't regret it.
For servos of this size get smaller 5g ones.
battery get this http://www.rcbazaar.com/products/2461-wolfpack-white-900mah-25c-74v.aspx
motor get this http://www.rcbazaar.com/products/2398-avionic-m202820-kv1400-micro-brushless-motor.aspx
esc get this http://www.rcbazaar.com/products/2443-avionic-white-12amp-esc.aspx

These are alternatives

But 635 motor and 695 esc is 1330
And I have to buy bullet connectors
And combo comes for 1116

pm

@nilharsh
@sooraj.palakkad
There have been reports that the Donkey breaks its mounts in a crash, but we have yet to experience.
I was using in my Indore Bipe.
Devashish (forum member) has one in his small 3D, and has done over 100 flights with no problem.
Both of us happy with the Donkey 2204 combo.
Incidentally, probably the least expensive...

Emax CF2822 1200kv is available for around Rs 500 (excellent value), but a 25-30amp esc will be required.

Choices are many - one has to start somewhere!

Would have suggested this (see pic) but does not seem to be available any more.
(My test showed 225gms thrust at 8100rpm on 8x4 black plastic prop, drawing 5amps/40watts on 2s 1300mah lipo at full throttle. Cost about 750 in 2012)

Iyer sir, I only suggested that because, if he is not on a urgent build, he can get these motors,
http://www.ebay.com/itm/151495041905?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

and these ESC:
http://www.ebay.com/itm/D589-EZ-20A-ESC-BEC-2A-for-RC-Airplane-Aircraft-Multicopter-/371203020022?pt=Radio_Control_Parts_Accessories&hash=item566d6c94f6