Next 2 pics are of real one .

Wanted to see if wing has
1. Camber
2. Dihedral

Going flying now!
Will respond after 7pm.

Sir unable to post pictures here,
They say can't post more than 200kb

No there is no dihedral,
Flat only airfoil.

  Go ahead.

Then you may need to cut two grooves at say 3" and 6" from LE, and glue in bamboo skeewers like these (kabab seekh!)

Iyer sir mailing you pics

Hello which airfoil should I use,

Template says that bend the wing with heating,

You can bend the airfoil

Yes, you can bend using heating.Even flat wings will work but dihedral wing can handle wind better!

Thank you guys,
Wing bended
Is that enough

Hinges done

No you need to bend more.

Ok thanks,

Does anyone has a used rx tx,
I don't have enough budget now so buying used one,
Only rx will also do.

which make RX are you looking for ? and did you cut 45deg bevel on the control surfaces ? cannot see clearly in the picture.

"Wing bended. Is that enough."   "No, you have to bend more"

Come on guys, you are supposed to be aeromodellers. What kind of talk is that?

Simply: Bend one side of the wing to an angle of ..... degrees
Or create the dihedral by laying the wing flat and lifting one half to a height of ..... mm above the level

Quote from: sahilkit on December 01, 2014, 05:10:54 PM
which make RX are you looking for ? and did you cut 45deg bevel on the control surfaces ? cannot see clearly in the picture.

Hello sir looking for rx for hk6ch v2 tx

Quote from: sanjayrai55 on December 01, 2014, 05:19:08 PM
"Wing bended. Is that enough."   "No, you have to bend more"

Come on guys, you are supposed to be aeromodellers. What kind of talk is that?

Simply: Bend one side of the wing to an angle of ..... degrees
Or create the dihedral by laying the wing flat and lifting one half to a height of ..... mm above the level

Sorry sir
First model

Sanjay  sir you can't call me a modeller can you
Nowhere cocompared to you.

BTW from bend it more I meant to simply make it more underca mbered.

RCRN:

You are a modeller. A budding one, but nonetheless a modeller 

will the below one do or looking for a much lower priced Rx ?

http://hobbysea.com/products.php?216&cPath=8&sid=1b640ac06e59fdca6aa5903e79154787

Thank you Sanjay Sir, But I don't consider myself a full modeller.

You mean like a half-cooked egg? Functional, but runny at the edges