RC India

hiiiiii everyone

is there any one have a plan of controlline trainer airplane i wanna construct it and fly
my contact no is 9428331598 pls contact me

Welcome to the forum. There are a number of plans around. Most of us on the forum work the old-skool way and do not advocate "push notifications".  :P.

You might want to search for 'avispad' to begin with and follow the line that opens up.
All the best!

Update: Ah my fault, I did not realize you were looking for a control line. I am sure there are a number of experienced flyers who can help.

Sharma Models Jodhpur have a wide range

And you are not welcome to post this in multiple posts. You seem intelligent, don't make us think different  ;)

Sharma ji from jodhpur provide control line.
As per my experience Windson is a good choice with .25 OS

hi, I am CL pilot/ builder from Slovakia, Europe. For begginers I strongly recommend Ringmaster plane. I have some plans, you can contact me by email .
Planes are electric powered witch cheap component from Hobbyking. I have two version - with foam wing and with clasiccal balza construction wing.
Here is some photos from build

https://get.google.com/albumarchive/117679045049368081533/album/AF1QipPwLhxVKnzKBIeLRkQavMTkSaVI0IW1JukD5cfH

https://get.google.com/albumarchive/117679045049368081533/album/AF1QipPh6T3XGKwWoovUSn0plseqlmOQfZxkkZuDiXdj

https://get.google.com/albumarchive/117679045049368081533/album/AF1QipPCOAEBKt0ZNlqc4Ioay5RR-xJrYtNwjT8z6KgT

Very nice build technique Jofrey  {:)} {:)}

Tell me: are you covering with Sign Vinyl? And do you putit directly on the foam, or do you first do some treatment?

Is the foam high density?

it is standard vinyl plastic film for advertisement companies. I only sanded foam with sand paper (320), then I wash wing under shower with water to remove foam dust. After drying in normal ambient temperature a applied vinyl film.
Foam is standard density - :-) 14-16 kg/m^3.

Fantastic!

Does it stick perfectly? Not come out?

It hold perfectly..just you have to overlap foil on leading and trailing edge. For best result you can use hot air gun to finish. Hot air gun use carefully

OK! Thanks Jofrey

What is the best way of making a dihedral wing in foam according to you?

Also if you want any marking on wings, pictures etc., you can ask advertisement company to print your design on white foil, then you can put it on wing same way

Make separate each half of wing and install join from plywood and glue it together. If you want make  disassembled wings you have to make bushing. Usually I am using CF tube installed into balsa block and glued to foam wing

OK. Thank you  :thanks:

here is some photos how to make split foam wing with join

https://photos.google.com/album/AF1QipOie4WMV0XJwegj5NussN5wyS3HE1vNZkqsWs90

This link is not working :(

I hope this one will work

https://photos.google.com/share/AF1QipNQzRsSRlh2NNyewtfZnrZwaAjZbmEuJLdl3UR3e4xqdjJ-kZki0Ht6mnD2fvhd3A?key=WU50VWpfdHpTRUwzYm5jQ2tMcl9MZUkwbUJlSldR

or this

https://f4k3url/photos/NvRS2PcC7YhmaktL8

Beautiful sailplane  :goodjob:

Thank you... unfortunatelly this plane is "died" -  I lost RC signal when plane was in altitude about 200 meters and ..... nice crash :)

Dear CL lover

The Winson H of Sharma is an aerobatic model. If you are looking for training yourself with limited help, please look for plans or kits of "SKY SUGAH" or "Mini Sugah".

For intermediate flying experience, we suggest "Bunt maker", "Winson H", Peace Maker.

The best place to look for plans would be NCC Air Squadron. Let us know if you need help locate one.

I can't forget my Control Line days and you just rejuvenated the old memories. Good luck.

Regards,

Sphere Hobbies
Ahmedabad
India
+91-99251-20630