with the last extra build for nitro.. coming just 1day early for the sweepstakes.. this one comes in right in time...
can say it as a scratch build since the dimensions and other were taken from a 3 view diagram and traced to get it laser cut...
any one interested in building a same... i would be more than happy to share the .CDR ( corel draw X5) for laser cutting.
attaching pics...
(https://lh6.googleusercontent.com/-Towjptuioko/UTN9sCPuVII/AAAAAAAABvA/xVmQX-ELKlw/w703-h641-p-o-k/DSC03331.JPG)
(https://lh3.googleusercontent.com/-nqaFqjxiP10/UTN9scUKNkI/AAAAAAAABvI/TfhX63JcrZY/w423-h316-o-k/DSC03332.JPG)
(https://lh4.googleusercontent.com/-9s4LzvKZgk8/UTN9wy311RI/AAAAAAAABvU/EBa_vhhpuUk/w423-h316-o-k/DSC03334.JPG)
(https://lh4.googleusercontent.com/-LI7XLKQFWvM/UTN9yHfoz4I/AAAAAAAABvk/NP1xsEItmn4/w424-h316-o-k/DSC03335.JPG)
(https://lh6.googleusercontent.com/-hICYSxO9MEY/UTN9srNArzI/AAAAAAAABvM/UabbAWsiwDc/w424-h316-o-k/DSC03333.JPG)
(https://lh4.googleusercontent.com/-WKowUurlQGs/UTN9xzJlcgI/AAAAAAAABvg/Ch77Imx1fo8/w517-h386-o-k/DSC03336.JPG)
(https://lh4.googleusercontent.com/-B-v18rRts_I/UTN923tpHII/AAAAAAAABv0/8EXENf33crI/w517-h386-o-k/DSC03337.JPG)
(https://lh3.googleusercontent.com/-rmOhNYxIgRw/UTN935GEn5I/AAAAAAAABv8/qe5tgJKLdgg/w517-h386-o-k/DSC03339.JPG)
dimensions taken from
(http://t3.gstatic.com/images?q=tbn:ANd9GcT7_65AplhG8GrCOTHDKT56dc3UM2GTU0RYrIYi_5yTTTmf-zru)
where do you get them laser cut and how expensive it is to get it cut?
Regds
saurabh
there is a local laser cutting guy... charges around :Rs: 15/ min.
Cool how long did it take for you.... And what thickness you can cut in Normal ply
Cool! What power system are you planning on?
Quote from: rastsaurabh on March 04, 2013, 10:51:27 AM
Cool how long did it take for you.... And what thickness you can cut in Normal ply
it takes around 2-3 mins for cutting the entire plane this size...
Quote from: sanjayrai55 on March 04, 2013, 10:53:42 AM
Cool! What power system are you planning on?
motor: GT2215
ESC: TGY plush 30
BAT: nanotech 2250 3S 35-70C
Which s/w u use for this and what ply thickness he can cut.
i have tried around 3mm ply.... but it takes a lot of time... around 25-30 mins for the same cutting... hence expensive.. ( char aane ki murgi bara aane ka masala)
wise enough to use balsa, u can design in a balsa saving config for minimum wastage...
Sorry for so many questions but what is the reliable source of balsa in India
happy to answer all.....
best source for balsa (as what i buy from) RCDHAMAKA, SPHEREHOBBIES.... wide variety
some progress...
servos, motor, esc in.... now the connection to Rx remains...
(https://lh4.googleusercontent.com/-DbkTUOO6nug/UTY0gS_07HI/AAAAAAAABw0/Vde_tNnypWI/s679/DSC03342.JPG)
(https://lh3.googleusercontent.com/-9j15ALszkUk/UTY0hGkgcKI/AAAAAAAABxA/kuo6rK3WOeA/s679/DSC03344.JPG)
its nitro big brother with a .25 FP on
(https://lh5.googleusercontent.com/-1TGmh0RrbG4/UTY0gqdoq5I/AAAAAAAABw8/cXhUyJxtyoM/s679/DSC03343.JPG)
Nice build Vish! When do you maiden her?
hope full tomo eve.... if all works out well...!!
Superb build vish bhai.... All the best for your maiden... :thumbsup: :thumbsup:
Superb built vish, :thumbsup: :thumbsup:
The model drew me into "love at first sight".
u can still make love to it.... she is with bilal :giggle: :giggle: ....
some snaps from flight.: courtesy RCbazaar
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc7/305226_425612524195386_201830875_n.jpg)
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-snc7/575848_425612630862042_527010284_n.jpg)
:giggle: :giggle: :giggle:
Bilal took her to his place :banghead: :banghead:
Ill have to build one for myself..