Text only | Text with Images

RC India

RC Models => Electric Planes => Topic started by: adilshabbir on December 29, 2013, 10:58:59 PM

Title: Build under construction - Electric fighter jet type model
Post by: adilshabbir on December 29, 2013, 10:58:59 PM
Span: 26" (660mm)
Length: 40.5" (1029mm)
Motor:  (2200kv)
Prop: APC 6x4E
Title: Re: Build under construction - Electric fighter jet type model
Post by: adilshabbir on December 29, 2013, 11:16:34 PM
Servo and Motor
Title: Re: Build under construction - Electric fighter jet type model
Post by: adilshabbir on February 24, 2014, 01:07:03 AM
sporty look
Title: Re: Build under construction - Electric fighter jet type model
Post by: devangflyer on February 24, 2014, 01:18:21 AM
Sirji great build , hope to see a maiden video ,  plans pls  :bow: :goodjob:
Title: Re: Build under construction - Electric fighter jet type model
Post by: utkarshg13 on February 24, 2014, 02:16:18 AM
Superb!! It looks beautiful {:)}. Pls post the video of maiden.
Title: Re: Build under construction - Electric fighter jet type model
Post by: sanjayrai55 on February 24, 2014, 07:39:43 AM
Very nice looking build  {:)} {:)}

Some details about weight? Are these FT plans you built from?

The pushrods look scary. Could flex under load
Title: Re: Build under construction - Electric fighter jet type model
Post by: K K Iyer on February 24, 2014, 09:18:56 AM
@adilshabbir,
Before trying to fly, please
1. Replace pushrods
2. Connect pushrod to control horn at the hole farthest away from the base.
(The way it is connected now, at the hole closest to the base, you will get excessive movement of the control surfaces, resulting in oversensitive controls)

Please also reverse the prop. Remember to check CG.
Best of luck.
Title: Re:
Post by: docnayeem on February 24, 2014, 09:31:09 AM
Good build ...
What material  had been used for construction
Text only | Text with Images