HI Guys

After making and and crash landing my Sport Trainer I am building a F-22 Raptor with 28" WS now using 5mm Bio foam purchased from Venus Stationery, Pune @ 80 rs per sheet.

Plans downloaded from http://rc.tomhe.net

Below mentioned are the details of it

1) 2200 KV Motor (Thanks to Pankaj Verma to provide me the Motor at the right time) 

2) 30A Mystery ESC

3) 6 x 4 Prop

4) 11.1 V Li-po

5) 2 Nos 9g servos

& Carbon Spar to strengthen the plane

Have already done with with the cutting.

Will post the pics soon

Wait for more to come as I progress.

Please do give suggestion to make this build better

Regards

Viraj Suryawanshi

This is the pic after the cutting.

Will post more after some progress on it...

One ques    .. I have always used Hot glue gun to build .. But want to use other solution now.. which is the best which will sut biofoam.. cant get 5min Expoxy anywhere in pune

Regards

Viraj

Use Araldite Klear...its available everywhere in Pune....also u can use fevitite epoxy.

thanks bokilap

I think Fevitite will be better is it ??/

I personally use Araldite klear...its really good! 

if you could find try using Fevicol Decoration glue, it is rubber based glue, just like Fevibond but does not eat foam!!!!

one more thing as i can see ur undercarriage height is very less, so if u do belly landing then there are chances that prop may brush ground and that may eventually damage ur motor mount...

keep posting your progress

all the best!!

Fevicol Decoration glue work preety good, tried it after pasting my f-22 with hot glue gun Myself.

hi ashJR7202

This what i have got in plan from rc.tomhe.net

is there any other way to increase the height ?

I am using a 6 x 4 prop for this

Regards

Viraj

if u chk their videos, u will see those people are flying/landing mostly on grass, but in my case i couldnt find grass land through out the yr, and flown mostly on dryland, except for winter season. so, for me, landing has been a big issue for these foamies....

so what i do is, use 3 pieces of 2-3mm CF rod and stick it under the plane like landing gear, so that it will land on those rods and maintain height, that avoids prop touching ground. check 1st pic

in my Latest 23" Eurofighter i increased height of vertical walls and used 8mm biofoam and cover it with fiber tape, so that it can do belly landing.. this really helps a lot, fiber tape avoid any damage to contact surface as well. this make ur plane look little out of proportion but saves ur plane

thanks ashJR7202 .. ur post was really a help..

Will follow the same recipe.. By the way i did foolish thing yesterday.. Bought a Canned spray paint to colour my plane..

So I spayed it all over the plane and left it to dry.. when i came back and saw.. the paint had eaten almost half of the foam..

So now will have to start again now 

Viraj

what!!!!!!  

always keep in mind, when ever ur trying anything new, 1st try it on sample material and once ur sure then only use it on the actual model!!!!!!!

there is flying wing post from Vector (Amar), where he has used can spray, and given specific instructions on how to use those spray... while doing anything, if ur not aware of the results, then do search post, get some info, discuss and then proceed, other wise results will be disaster 

foam is very fragile so need to be handled carefully.....

anyways, ur in a hobby and u hav to always keep ur spirit high!!!! get ready for ur next model.......

Viraj, why dont you visit the pancard club, baner field?
There you will meet some experts who can really help you out, if you want.
We fly on Saturdays and Sundays, 7:30 AM onwards.

for will meet u this sunday ..

Btw saw photography pics.. they are awesomeeeeeeeeeeeeeeee 

I am having trouble findin motor for my plane, Everybody seems out of stock...?

http://www.rcindia.org/self-designed-diy-and-college-projects/diy-first-build-of-f-22/

Do rate my plane...

Viraj,
Which other models do you fly? or is this your first build? where do you fly?

http://www.rcindia.org/rc-general-topics/rc-plane-stolen-at-the-noida-field/msg54947/#msg54947

Was the condition of my first plane, The F-22 is my first DIY lookin for Motor for it no first flight.

Hi Bokilap

I am a beginner ...

my first build was a sport trainer pic attached .. crashed it after on my first flight.. but i can swear it was a very stable plane


and now F-22 is my second build..

I tried flying only twice at a ground near my house at wagholi

Regards


Viraj
Viraj 

I am a beginner too.

I started flying with multiplex easystar and now flying a slow stick.

Since you are a beginner, may i suggest you to build a slow flyer (easy to fly ) plane first instead of F22...this is just a suggestion.....till you improve your control/orientation/flying skills.

I have started building a Blubaby 33 inch and is now almost complete.

This will give me confidence of building a plane and also flying.

F22 is not considered a beginner plane and chances of crashing it on first few flights are more.....again just my personal oinion.

Anyways, you are welcome to join us at baner field where experts like Prady, Amar etc may help you.

cheers!

I know bokilap I should try with some easy planes first..

That is why I made Sports Trainer.. It is a very stable plane and easy to fly as well.. now it is crashed but will repair it by this sunday and will fly it again.. will surely try to come this sunday and take experts tips from there..

Making F-22 as well now.. but will only fly once I am confident enough after flying sport trainer

Thanks again

Hi guys

posting after a long time ..but If  can read in my previous post. i tried to color my 5m f-22 using a spray can and it ate the entire foam.. cudnt post any pics of as I cudnt find anything .. 

so to shop again and bought biofoam .. but this time its 8mm.. as cudn't get 5mm sheet .. so the difficulty was to get the cuts in 8 mm sizes now instead of 6mm as i downloaded the plan from (6mm fly rc tomhe.net)

after drawing the entire plan on the foam i had to make the cuts of 8mm which i did using scale .. 1mm each side.. .. and tried fixing the parts.. Its a perfect match..

Will post pics by evening.. and latest updates in that ..

some progress on the my F-22 guys..

1st pic will show how I have put carbon spar to strengthen the plane..

2nd is joint

have used glue as well as fiber tape for better support..

Any suggestion please let me know..

Regards

Viraj

gud work keep going, wat is the wingspan

thanks ashJ wing span is 28"

I am yet to do the trimming which will happen tonight .. 

using hobby kit and sand paper