Hello Friends ,
Built a low wing Aerobatic model Named ""CLOUDY '''
Specifications
Wing Span : 40 Inches
Fuselage Length: 33 inches
Motor Brushless 2600KV 385 W
Servo 9 gms 4 nos
ESC 50 A
Prop : 7 x 6 E
Battery 2200 Mah 11.1 v 25c
Take off was at 50 % thro, she took off in just 6 feet ,did the fly pass ,,loops , inverted flying ,she performed well in Strong windy condition,,Landing was difficult as i was unable to find a hard strip in the sea shore ,because of sea sand i have to glide and allow the model to drop immediatly to save Her from injury ;D .here is the video link
www.youtube.com/watch?v=fn5mVT0q3eM
Wow this looks awesome and also the Flight...
{:)} {:)} {:)} {:)}
Can you post the build plan? :thumbsup:
awesome.. even i need the build plans.. :)
Can u share the plan, model looks excellent and awesome finish
hi friends
really sorry i dont have a plan with me ,i just drawn a rough design on coro sheet and made this plane ,, have to measure it if a plan has to be generated ,, just for a time pass i made this ,and was not sure it will fly lol lol ,, its just a very simple design ,any one can make it ..thanks.
But I think it is difficult to fly this for a beginner with this 2200 kv motor... will be out of sight too early...
I love to try this with a different setup.. :)
Sent from my Canvas using tapatalk 2
wow..this doesnt looks like a scratch build at all..salute..can you tell me how did you build and install that smart cockpit out on top there??
hi
my initial plan was to put an cockpit made from thermocol ,, i shared this with Mr.roopesh , it was his creation which made this beauty more attractive .. koodus roopesh your efforts are really appriciated .
Very well done Madhavan {:)} and good flying too.... kudos to both you and Roopesh!
hi maddy,
chk my creation
hi madhavan i want to build an rc plane please help me if you have a plan please tell me
i have motor- 1000kv
esc - 40 a
battery- 11.1v is it right to build