Hi Sai,
      I was looking at rcforall site for CF square tubes. I need a 4mm x 7mm square tube for a GWS pico-stick slope glider that I want to convert to brushless. Do you have square tubes that will fit this measurement? Also what BL motor and prop would you recommend for this plane. Do you have any available. I also want a motor mount. Since this is a slope glider the kit does not have a mount for the motor. Currently have it set up with the stock wood boom.

TG ,
I have Slow Stick Fuse 10 x 10 x 600 mm with an additional piece of 10 x 10 x 150 mm. this is priced at Rs 200/- +courier .
To the best of my knowledge the fuse boom of the slow stick and the pico stick should be the same .

I have the GWS Motor Mount , I will recommend the RCFORALL DY 2204 Combo based on the Flying weight of around 200 gms.

http://cgi.ebay.in/RCFORALL-BRUSHLESS-OUT-RUNNER-COMBO-A2204-14_W0QQitemZ150326110265QQcmdZViewItemQQptZLH_DefaultDomain_203?hash=item150326110265&_trksid=p4634.c0.m14.l1262

OR

http://cgi.ebay.in/1300RPM-V-BRUSHLESS-MOTOR_W0QQitemZ110368296520QQcmdZViewItemQQptZLH_DefaultDomain_203?hash=item110368296520&_trksid=p4634.c0.m14.l1262

Motor Mount
http://cgi.ebay.in/L-Stick-Motor-Mount_W0QQitemZ110362539007QQcmdZViewItemQQptZLH_DefaultDomain_203?hash=item110362539007&_trksid=p4634.c0.m14.l1262
OR

GWS 28 mm mount .http://cgi.ebay.in/BL-Motor-Mount-for-28mm-Motor_W0QQitemZ110355449060QQcmdZViewItemQQptZLH_DefaultDomain_203?hash=item110355449060&_trksid=p4634.c0.m14.l1262

Prop : GWS 8040 OR 7060


Sai