hello,
I was inspired by "Doing A Goolie - Flight Line Plans" from Micron Radio controls.
pl watch their video.
http://www.youtube.com/watch?v=MfILCSJhv98
Based on this RCGROUPS had a project called CYCLONE, a KFm4 wing 30 inch.
I made this with 3mm Depron, and the gear.
Rady for maiden.
pl find some photos and the initial static test video.
Will post some video if it flies !!!
http://www.youtube.com/watch?v=MPQgpe7ArcQ
As always, another good one ! :thumbsup:
How are you planning to vary the thrust ? Just put the two motors on two different channels, and do some kind of mixing in the radio ?
dear anwar,
thank you.
yes i have two escs connected to two channels, Ch3 and ch4.
Throttle is mixed to rudder to get differential thrust.
if u see the video, u will notice the two motors varying their speed as you give rudder inputs.
will need lot of finetuning before i maiden it.
ashta